2016 FIAT 500 Abarth Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2016 FIAT 500 Abarth, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x98 |
|---|---|
| Lug Nut / Bolt Size | B 12x1.25 |
| Center Bore (CB) | 58.1 mm |
| Offset (ET) | 42 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2016 500 Abarth — Year-Specific Fitment Context
The 2016 FIAT 500 Abarth is in year 3 of 6 using the 4x98 pattern (2014–2019). Wheels from any 2014–2019 FIAT 500 Abarth are cross-compatible with the 2016 model.
FIAT 500 Abarth Bolt Pattern by Year
The table below shows how the 500 Abarth's wheel specifications have changed over the years. The 2016 model year is highlighted.
Fitment Notes
The 2016 FIAT 500 Abarth has a bolt pattern of 4x98.
This means it is a 4 lug pattern with a circle diameter of 98mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, FIAT 500 Abarth appears from 2014 to 2019 (6 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 7.0 mm
4x98 Pattern Context
This bolt pattern appears on 35 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 4x98:
2016 FIAT 500 Abarth — Frequently Asked Questions
What is the bolt pattern for a 2016 FIAT 500 Abarth?
The 2016 FIAT 500 Abarth uses a 4x98 bolt pattern (also called lug pattern or PCD). The center bore is 58.1mm and the offset is 42mm.
What other years of FIAT 500 Abarth have the same bolt pattern as the 2016?
The FIAT 500 Abarth uses the 4x98 pattern from 2014 through 2019. Wheels from any of these model years are dimensionally compatible with the 2016, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2016 FIAT 500 Abarth?
Absolutely. Just ensure the aftermarket wheels have a 4x98 bolt pattern, an offset near 42mm, and a center bore of at least 58.1mm (using hub rings if larger).
Will wheels from another FIAT fit my 2016 500 Abarth?
Only if they share the exact same 4x98 bolt pattern, a compatible offset, and a center bore equal to or larger than 58.1mm.
Do 2016 FIAT 500 Abarths use lug bolts or lug nuts?
The 2016 500 Abarth requires B 12x1.25 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What does 42mm offset mean for the 2016 500 Abarth?
An offset of 42mm means the wheel's mounting surface is 42mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your FIAT.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Editorial Fitment Notes
FIAT 500 Abarth is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2014-2019 (6 model years).
- Observed bolt-pattern variants: 1 (4x98).
- Observed total offset span across years: 7.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 2.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2016 FIAT 500 Abarth, please report it via our About page contact so we can verify and update this record.