2025 FIAT 500e Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2025 FIAT 500e, along with offset and center bore data.
2025 FIAT 500e Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 65.1 mm |
| Offset (ET) | 40 |
| Torque Specs | 74 ft-lbs (100 Nm) |
2025 500e — Year-Specific Fitment Context
The 2025 is the only model year of the FIAT 500e in our database using the 5x108 bolt pattern. Note: the 2024 model used a different pattern (4x98), so its wheels are NOT interchangeable with the 2025. Across its full production run (2013–2025), the 500e has also used: 4x98.
FIAT 500e Bolt Pattern by Year
The table below shows how the 500e's wheel specifications have changed over the years. The 2025 model year is highlighted.
5x108 Pattern Context
This bolt pattern appears on 581 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x108:
Quick Tips & Safety Warnings
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 74 ft-lbs (100 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
2025 FIAT 500e — Frequently Asked Questions
What is the bolt pattern for a 2025 FIAT 500e?
The 2025 FIAT 500e uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 65.1mm and the offset is 40mm.
Can I use 2024 FIAT 500e wheels on a 2025?
No. The 2024 500e used a 4x98 bolt pattern, which differs from the 2025's 5x108. They are not interchangeable.
Can I put aftermarket wheels on my 2025 FIAT 500e?
Absolutely. Just ensure the aftermarket wheels have a 5x108 bolt pattern, an offset near 40mm, and a center bore of at least 65.1mm (using hub rings if larger).
What lug nut size does the 2025 FIAT 500e use?
The 2025 FIAT 500e uses 12x1.25 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Why is matching the 65.1mm center bore important for the 2025 500e?
The 65.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
How do I measure the bolt pattern on my 2025 FIAT?
The 2025 500e uses a 5x108 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset