2017 FIAT 500e Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2017 FIAT 500e, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x98 |
|---|---|
| Lug Nut / Bolt Size | B 12x1.25 |
| Center Bore (CB) | 58.1 mm |
| Offset (ET) | 42 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2017 500e — Year-Specific Fitment Context
The 2017 FIAT 500e is in year 5 of 12 using the 4x98 pattern (2013–2024). Wheels from any 2013–2024 FIAT 500e are cross-compatible with the 2017 model.
FIAT 500e Bolt Pattern by Year
The table below shows how the 500e's wheel specifications have changed over the years. The 2017 model year is highlighted.
Fitment Notes
The 2017 FIAT 500e has a bolt pattern of 4x98.
This means it is a 4 lug pattern with a circle diameter of 98mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, FIAT 500e appears from 2013 to 2024 (8 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 7.0 mm
4x98 Pattern Context
This bolt pattern appears on 35 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 4x98:
2017 FIAT 500e — Frequently Asked Questions
What is the bolt pattern for a 2017 FIAT 500e?
The 2017 FIAT 500e uses a 4x98 bolt pattern (also called lug pattern or PCD). The center bore is 58.1mm and the offset is 42mm.
What other years of FIAT 500e have the same bolt pattern as the 2017?
The FIAT 500e uses the 4x98 pattern from 2013 through 2024. Wheels from any of these model years are dimensionally compatible with the 2017, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2017 FIAT 500e?
Refer to your owner's manual for exact specs, but always tighten the B 12x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Can I use spacers on my 2017 FIAT 500e?
Yes, but ensure the wheel spacers match the 4x98 bolt pattern and 58.1mm center bore. Also verify that you have enough thread engagement for your B 12x1.25 hardware.
Why is matching the 58.1mm center bore important for the 2017 500e?
The 58.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What lug nut size does the 2017 FIAT 500e use?
The 2017 FIAT 500e uses B 12x1.25 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Editorial Fitment Notes
FIAT 500e is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2013-2024 (8 model years).
- Observed bolt-pattern variants: 1 (4x98).
- Observed total offset span across years: 7.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 2.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2017 FIAT 500e, please report it via our About page contact so we can verify and update this record.