2024 FIAT 500e Bolt Pattern

Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2024 FIAT 500e, along with offset and center bore data.

Bolt Pattern (Lug Pattern) 4x98
Lug Nut / Bolt Size 12x1.25
Center Bore (CB) 58.1 mm
Offset (ET) 35
Torque Specs 80 ft-lbs (108 Nm)

2024 500e — Year-Specific Fitment Context

The 2024 model year is the final year of the FIAT 500e's 4x98 bolt pattern run (since 2013). Wheels from any 2013–2024 FIAT 500e are cross-compatible with the 2024 model.

FIAT 500e Bolt Pattern by Year

The table below shows how the 500e's wheel specifications have changed over the years. The 2024 model year is highlighted.

Year Bolt Pattern Center Bore Offset
2013 4x98 58.1 42
2014 4x98 58.1 42
2015 4x98 58.1 42
2016 4x98 58.1 42
2017 4x98 58.1 42
2018 4x98 58.1 35
2019 4x98 58.1 35
▸ 2024 4x98 58.1 35

4x98 Pattern Context

This bolt pattern appears on 35 vehicles in our current database and is considered uncommon.

Examples of other vehicles using 4x98:

Expert Buying Guide for 2024 FIAT 500e

For the 2024 FIAT 500e, the bolt pattern is 4x98 with a center bore of 58.1mm. When selecting aftermarket wheels, ensure they have a center bore of at least 58.1mm; otherwise, hub-centric rings are mandatory to prevent vibration and ensure proper load distribution. The offset is sensitive: stick to 35mm ±5mm to avoid rubbing or clearance issues with suspension and brakes. Lug nuts must be 12x1.25 with a conical (60-degree) or ball seat—never use flat-seat lug nuts. Always torque to manufacturer specs (85-95 ft-lbs) and re-torque after 50-100 miles. This is the final year of the 4x98 pattern (2013-2024), so wheels from earlier 500e models are compatible.

Historical Fitment Data Reference

In our dataset, FIAT 500e appears from 2013 to 2024 (8 model years). Across recorded model years, this model generally keeps the same bolt pattern.

  • Observed bolt-pattern variants for this model: 1
  • Observed center-bore variants for this model: 1
  • Observed lug-size variants for this model: 2
  • Observed total offset span across years: 7.0 mm

Quick Tips & Safety Warnings

Ready to upgrade or perform maintenance?

🛒 Shop Tools & Accessories on Amazon

As an Amazon Associate, I earn from qualifying purchases.

2024 FIAT 500e — Frequently Asked Questions

What is the bolt pattern for a 2024 FIAT 500e?

The 2024 FIAT 500e uses a 4x98 bolt pattern (also called lug pattern or PCD). The center bore is 58.1mm and the offset is 35mm.

What other years of FIAT 500e have the same bolt pattern as the 2024?

The FIAT 500e uses the 4x98 pattern from 2013 through 2024. Wheels from any of these model years are dimensionally compatible with the 2024, provided the offset and center bore also match.

Do 2024 FIAT 500es use lug bolts or lug nuts?

The 2024 500e requires 12x1.25 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.

What is the center bore of a 2024 FIAT 500e?

The factory center bore (hub bore) for the 2024 FIAT 500e is 58.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.

How do I measure the bolt pattern on my 2024 FIAT?

The 2024 500e uses a 4x98 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.

What lug nut size does the 2024 FIAT 500e use?

The 2024 FIAT 500e uses 12x1.25 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.

Need more vehicle fitment data?

Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.

Get the Full Dataset
Confidence Level
High
Verified Source
Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last Updated
2026-07-08

FIAT 500e By Year

2013 2014 2015 2016 2017 2018 2019 2024

Other FIAT Models

124 Spider 500 500 Abarth 500L 500X 500c 500c Abarth 500e