2016 FIAT 500e Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2016 FIAT 500e, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x98 |
|---|---|
| Lug Nut / Bolt Size | B 12x1.25 |
| Center Bore (CB) | 58.1 mm |
| Offset (ET) | 42 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2016 500e — Year-Specific Fitment Context
The 2016 FIAT 500e is in year 4 of 12 using the 4x98 pattern (2013–2024). Wheels from any 2013–2024 FIAT 500e are cross-compatible with the 2016 model.
FIAT 500e Bolt Pattern by Year
The table below shows how the 500e's wheel specifications have changed over the years. The 2016 model year is highlighted.
4x98 Pattern Context
This bolt pattern appears on 35 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 4x98:
Expert Buying Guide for 2016 FIAT 500e
For the 2016 FIAT 500e, the 4x98 bolt pattern and 58.1mm center bore are critical. Aftermarket wheels must have a bore ≥58.1mm; use hub-centric rings to avoid vibrations. Offset is sensitive: stick to 42mm ±5mm to prevent rubbing or clearance issues. Always use the correct lug nuts: B 12x1.25 thread with a conical (60-degree) or ball seat matching the wheel. Never use incorrect seat types—this can cause wheel loosening. Re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, FIAT 500e appears from 2013 to 2024 (8 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 7.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 85-95 ft-lb after 50-100 miles.
- ✅ Ensure aftermarket wheels have a center bore ≥58.1mm; use hub rings if larger.
- ✅ Verify offset is 42mm ±5mm to avoid brake caliper or suspension contact.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2016 FIAT 500e — Frequently Asked Questions
What is the bolt pattern for a 2016 FIAT 500e?
The 2016 FIAT 500e uses a 4x98 bolt pattern (also called lug pattern or PCD). The center bore is 58.1mm and the offset is 42mm.
What other years of FIAT 500e have the same bolt pattern as the 2016?
The FIAT 500e uses the 4x98 pattern from 2013 through 2024. Wheels from any of these model years are dimensionally compatible with the 2016, provided the offset and center bore also match.
Why is matching the 58.1mm center bore important for the 2016 500e?
The 58.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
How do I measure the bolt pattern on my 2016 FIAT?
The 2016 500e uses a 4x98 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What does 42mm offset mean for the 2016 500e?
An offset of 42mm means the wheel's mounting surface is 42mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your FIAT.
What lug nut size does the 2016 FIAT 500e use?
The 2016 FIAT 500e uses B 12x1.25 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset