2016 FIAT 500X Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2016 FIAT 500X, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x110 |
|---|---|
| Lug Nut / Bolt Size | B 12x1.25 |
| Center Bore (CB) | 65.1 mm |
| Offset (ET) | 42 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2016 500X — Year-Specific Fitment Context
The 2016 model year marks the beginning of the FIAT 500X's 5x110 bolt pattern era, which continued through 2017 (2 consecutive years). Wheels from any 2016–2017 FIAT 500X are cross-compatible with the 2016 model. Across its full production run (2016–2022), the 500X has also used: 5x98.
FIAT 500X Bolt Pattern by Year
The table below shows how the 500X's wheel specifications have changed over the years. The 2016 model year is highlighted.
Fitment Notes
The 2016 FIAT 500X has a bolt pattern of 5x110.
This means it is a 5 lug pattern with a circle diameter of 110mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, FIAT 500X appears from 2016 to 2022 (7 model years).
Across model years, this model appears with 2 bolt patterns (5x110, 5x98).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 2.0 mm
5x110 Pattern Context
This bolt pattern appears on 126 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 5x110:
2016 FIAT 500X — Frequently Asked Questions
What is the bolt pattern for a 2016 FIAT 500X?
The 2016 FIAT 500X uses a 5x110 bolt pattern (also called lug pattern or PCD). The center bore is 65.1mm and the offset is 42mm.
What other years of FIAT 500X have the same bolt pattern as the 2016?
The FIAT 500X uses the 5x110 pattern from 2016 through 2017. Wheels from any of these model years are dimensionally compatible with the 2016, provided the offset and center bore also match.
What lug nut size does the 2016 FIAT 500X use?
The 2016 FIAT 500X uses B 12x1.25 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the center bore of a 2016 FIAT 500X?
The factory center bore (hub bore) for the 2016 FIAT 500X is 65.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What does 42mm offset mean for the 2016 500X?
An offset of 42mm means the wheel's mounting surface is 42mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your FIAT.
What is the factory wheel offset for a 2016 FIAT 500X?
The OEM offset for the 2016 500X is typically around 42mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Editorial Fitment Notes
FIAT 500X has multiple wheel-fitment records across generations, so matching exact year and trim is important before ordering wheels.
- Observed production years in our database: 2016-2022 (7 model years).
- Observed bolt-pattern variants: 2 (5x110, 5x98).
- Observed total offset span across years: 2.0 mm.
- Observed center-bore variants: 2 | lug-size variants: 2.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2016 FIAT 500X, please report it via our About page contact so we can verify and update this record.