2020 FIAT 500X Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2020 FIAT 500X, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x98 |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 58.1 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2020 500X — Year-Specific Fitment Context
The 2020 FIAT 500X is in year 3 of 5 using the 5x98 pattern (2018–2022). Wheels from any 2018–2022 FIAT 500X are cross-compatible with the 2020 model. Across its full production run (2016–2022), the 500X has also used: 5x110.
FIAT 500X Bolt Pattern by Year
The table below shows how the 500X's wheel specifications have changed over the years. The 2020 model year is highlighted.
Fitment Notes
The 2020 FIAT 500X has a bolt pattern of 5x98.
This means it is a 5 lug pattern with a circle diameter of 98mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, FIAT 500X appears from 2016 to 2022 (7 model years).
Across model years, this model appears with 2 bolt patterns (5x110, 5x98).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 2.0 mm
5x98 Pattern Context
This bolt pattern appears on 30 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 5x98:
2020 FIAT 500X — Frequently Asked Questions
What is the bolt pattern for a 2020 FIAT 500X?
The 2020 FIAT 500X uses a 5x98 bolt pattern (also called lug pattern or PCD). The center bore is 58.1mm and the offset is 40mm.
What other years of FIAT 500X have the same bolt pattern as the 2020?
The FIAT 500X uses the 5x98 pattern from 2018 through 2022. Wheels from any of these model years are dimensionally compatible with the 2020, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2020 FIAT 500X?
Refer to your owner's manual for exact specs, but always tighten the 12x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Do 2020 FIAT 500Xs use lug bolts or lug nuts?
The 2020 500X requires 12x1.25 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Can I use spacers on my 2020 FIAT 500X?
Yes, but ensure the wheel spacers match the 5x98 bolt pattern and 58.1mm center bore. Also verify that you have enough thread engagement for your 12x1.25 hardware.
What is the center bore of a 2020 FIAT 500X?
The factory center bore (hub bore) for the 2020 FIAT 500X is 58.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
- This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Editorial Fitment Notes
FIAT 500X has multiple wheel-fitment records across generations, so matching exact year and trim is important before ordering wheels.
- Observed production years in our database: 2016-2022 (7 model years).
- Observed bolt-pattern variants: 2 (5x110, 5x98).
- Observed total offset span across years: 2.0 mm.
- Observed center-bore variants: 2 | lug-size variants: 2.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2020 FIAT 500X, please report it via our About page contact so we can verify and update this record.