2026 Fisker Ronin Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2026 Fisker Ronin, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 40 |
| Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2026 Ronin — Year-Specific Fitment Context
The 2026 is the only model year of the Fisker Ronin in our database using the 5x114.3 bolt pattern.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2026 Fisker Ronin
The 2026 Fisker Ronin uses a 5x114.3 bolt pattern with a 66.1mm center bore. When selecting aftermarket wheels, ensure hub-centric rings are used to match the 66.1mm bore, preventing vibrations and ensuring proper load distribution. The offset is sensitive; the factory spec is 40mm. Deviating significantly can affect handling and clearance. Always verify that aftermarket wheels maintain a similar offset to avoid rubbing or suspension interference. Safety warning: The lug nut thread pitch is 14x1.5. Use only lug nuts with the correct thread pitch and seat type (cone or ball seat) to match the wheel. Improper lug nuts can loosen or damage the wheel studs. Re-torque after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Fisker Ronin appears from 2026 to 2026 (1 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving.
- ✅ Use hub-centric rings (66.1mm ID to 73.1mm OD for common aftermarket wheels) to prevent vibrations.
- ✅ Avoid offsets below 35mm or above 45mm to prevent rubbing on fenders or suspension components.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Fisker Ronin — Frequently Asked Questions
What is the bolt pattern for a 2026 Fisker Ronin?
The 2026 Fisker Ronin uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 40mm.
What is the center bore of a 2026 Fisker Ronin?
The factory center bore (hub bore) for the 2026 Fisker Ronin is 66.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Why is matching the 66.1mm center bore important for the 2026 Ronin?
The 66.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Will wheels from another Fisker fit my 2026 Ronin?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 66.1mm.
Can I put aftermarket wheels on my 2026 Fisker Ronin?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 40mm, and a center bore of at least 66.1mm (using hub rings if larger).
What lug nut size does the 2026 Fisker Ronin use?
The 2026 Fisker Ronin uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset