2025 Ford E-350 Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2025 Ford E-350 is 8x165.1 (8x6.5"). It has a center bore of 124.9 mm, an offset range of 0 to 12 mm (varies by year and wheel size; commonly 0 mm for 16x7 dually, 12 mm for 16x6 single rear wheel), and utilizes 14x1.5 (Flat seat, 21mm hex) fasteners tightened to 140 ft-lbs (190 Nm).
2025 Ford E-350 Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 8x165.1 (8x6.5") |
|---|---|
| Center Bore (Hub Bore) | 124.9 mm |
| Offset Range (ET) | 0 to 12 mm (varies by year and wheel size; commonly 0 mm for 16x7 dually, 12 mm for 16x6 single rear wheel) |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 140 ft-lbs (190 Nm) |
Imperial Match: 8x165.1 is commonly referred to as 8x6.5" in US Standard.
2025 E-350 — Year-Specific Fitment Context
The 2025 Ford E-350 is in year 2 of 3 using the 8x165.1 pattern (2024–2026). Wheels from any 2024–2026 Ford E-350 are cross-compatible with the 2025 model.
Ford E-350 Bolt Pattern by Year
Looking for all generations? View the complete Ford E-350 (2024–2026) Bolt Pattern & Generation Guide →
The table below shows how the E-350's wheel specifications have changed over the years. The 2025 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2024 | 8x165.1 | 124.9 | 0 to 12 mm (varies by year and wheel size; commonly 0 mm for 16x7 dually, 12 mm for 16x6 single rear wheel) |
| ▸ 2025 | 8x165.1 | 124.9 | 0 to 12 mm (varies by year and wheel size; commonly 0 mm for 16x7 dually, 12 mm for 16x6 single rear wheel) |
| 2026 | 8x165.1 | 124.9 | 0 to 12 mm (varies by year and wheel size; commonly 0 mm for 16x7 dually, 12 mm for 16x6 single rear wheel) |
2025 Ford E-350 Wheel Interchange & Donor Fitment Guide (8x165.1)
The 8x165.1 bolt pattern is shared by 867 vehicles in our database (common). For safe wheel swaps on the 2025 Ford E-350, donor rims must match the 8x165.1 PCD and have a center bore of at least 124.9 mm:
DIRECT HUB MATCH Same 8x165.1 Pattern & Exact 124.9mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2011 Ford E150 Passenger | 124.9 mm (Exact) | 0-15mm | 9/16 (Cone) |
| 2025 GMC HUMMER EV Pickup | 124.9 mm (Exact) | 25-35 | 14x1.5 (Flat) |
HUB RING FITMENT Same 8x165.1 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2021 Nissan NV1500 Cargo | 131.0 mm | 131.0mm → 124.9mm |
30 |
| 2021 Nissan NV2500 HD Cargo | 131.0 mm | 131.0mm → 124.9mm |
30 |
| 2021 Nissan NV3500 HD Cargo | 131.0 mm | 131.0mm → 124.9mm |
30 |
| 2021 Nissan NV3500 HD Passenger | 131.0 mm | 131.0mm → 124.9mm |
30 |
Quick Tips & Safety Warnings
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2025 Ford E-350 — Frequently Asked Questions
What is the bolt pattern for a 2025 Ford E-350?
The 2025 Ford E-350 uses a 8x165.1 bolt pattern (also called lug pattern or PCD). The center bore is 124.9mm and the offset is 0 to 12 mm (varies by year and wheel size; commonly 0 mm for 16x7 dually, 12 mm for 16x6 single rear wheel)mm.
What other years of Ford E-350 have the same bolt pattern as the 2025?
The Ford E-350 uses the 8x165.1 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
Will wheels from another Ford fit my 2025 E-350?
Only if they share the exact same 8x165.1 bolt pattern, a compatible offset, and a center bore equal to or larger than 124.9mm.
What lug nut size does the 2025 Ford E-350 use?
The 2025 Ford E-350 uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the factory wheel offset for a 2025 Ford E-350?
The OEM offset for the 2025 E-350 is typically around 0 to 12 mm (varies by year and wheel size; commonly 0 mm for 16x7 dually, 12 mm for 16x6 single rear wheel)mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What does 0 to 12 mm (varies by year and wheel size; commonly 0 mm for 16x7 dually, 12 mm for 16x6 single rear wheel)mm offset mean for the 2025 E-350?
An offset of 0 to 12 mm (varies by year and wheel size; commonly 0 mm for 16x7 dually, 12 mm for 16x6 single rear wheel)mm means the wheel's mounting surface is 0 to 12 mm (varies by year and wheel size; commonly 0 mm for 16x7 dually, 12 mm for 16x6 single rear wheel)mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Ford.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →