2018 Ford EcoSport Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2018 Ford EcoSport, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x108 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 63.4 mm |
| Offset (ET) | 38 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2018 EcoSport — Year-Specific Fitment Context
The 2018 model year marks the beginning of the Ford EcoSport's 4x108 bolt pattern era, which continued through 2022 (5 consecutive years). Wheels from any 2018–2022 Ford EcoSport are cross-compatible with the 2018 model.
Ford EcoSport Bolt Pattern by Year
The table below shows how the EcoSport's wheel specifications have changed over the years. The 2018 model year is highlighted.
Fitment Notes
The 2018 Ford EcoSport has a bolt pattern of 4x108.
This means it is a 4 lug pattern with a circle diameter of 108mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Ford EcoSport appears from 2018 to 2022 (5 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 1.0 mm
4x108 Pattern Context
This bolt pattern appears on 76 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 4x108:
2018 Ford EcoSport — Frequently Asked Questions
What is the bolt pattern for a 2018 Ford EcoSport?
The 2018 Ford EcoSport uses a 4x108 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 38mm.
What other years of Ford EcoSport have the same bolt pattern as the 2018?
The Ford EcoSport uses the 4x108 pattern from 2018 through 2022. Wheels from any of these model years are dimensionally compatible with the 2018, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2018 Ford?
The 2018 EcoSport uses a 4x108 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I use spacers on my 2018 Ford EcoSport?
Yes, but ensure the wheel spacers match the 4x108 bolt pattern and 63.4mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
What is the PCD for a 2018 Ford EcoSport?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2018 EcoSport, the PCD is 4x108.
How tight should I torque the lug nuts on a 2018 Ford EcoSport?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Editorial Fitment Notes
Ford EcoSport is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2018-2022 (5 model years).
- Observed bolt-pattern variants: 1 (4x108).
- Observed total offset span across years: 1.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 2.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2018 Ford EcoSport, please report it via our About page contact so we can verify and update this record.