2025 Ford F-600 Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2025 Ford F-600 is 8x170. It has a center bore of 125.2 mm, an offset range of Not Applicable, and utilizes 14x1.5 (Flat seat, 21mm hex) fasteners tightened to 165 ft-lbs (224 Nm).
2025 Ford F-600 Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 8x170 |
|---|---|
| Center Bore (Hub Bore) | 125.2 mm |
| Offset Range (ET) | Not Applicable |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 165 ft-lbs (224 Nm) |
2025 F-600 — Year-Specific Fitment Context
The 2025 Ford F-600 is in year 2 of 3 using the 8x170 pattern (2024–2026). Wheels from any 2024–2026 Ford F-600 are cross-compatible with the 2025 model.
Ford F-600 Bolt Pattern by Year
Looking for all generations? View the complete Ford F-600 (2024–2026) Bolt Pattern & Generation Guide →
The table below shows how the F-600's wheel specifications have changed over the years. The 2025 model year is highlighted.
2025 Ford F-600 Wheel Interchange & Donor Fitment Guide (8x170)
The 8x170 bolt pattern is shared by 197 vehicles in our database (uncommon). For safe wheel swaps on the 2025 Ford F-600, donor rims must match the 8x170 PCD and have a center bore of at least 125.2 mm:
DIRECT HUB MATCH Same 8x170 Pattern & Exact 125.2mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2015 Ford F250 Super Duty Super Cab | 125.1 mm (Exact) | 40 | 14x1.5 (Cone) |
| 2024 Ford F350 Super Duty Crew Cab | 125.1 mm (Exact) | 40 | 14x1.5 (Cone) |
| 2025 Ford E-450 | 125.2 mm (Exact) | Not Applicable | 14x1.5 (Flat) |
| 2025 Ford F-250 | 125.2 mm (Exact) | 40-45 | 14x1.5 (Flat) |
| 2025 Ford F-350 | 125.2 mm (Exact) | 40-45 | 14x1.5 (Flat) |
| 2025 Ford F-450 | 125.2 mm (Exact) | 40-45 | 14x1.5 (Flat) |
HUB RING FITMENT Same 8x170 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2017 Ford F350 Super Duty Regular Cab | 125.7 mm | 125.7mm → 125.2mm |
40 |
| 2001 Ford F350 Super Duty Super Cab | 125.7 mm | 125.7mm → 125.2mm |
40 |
| 2015 Ford F250 Super Duty Crew Cab | 125.7 mm | 125.7mm → 125.2mm |
40 |
| 2014 Ford F250 Super Duty Regular Cab | 125.7 mm | 125.7mm → 125.2mm |
40 |
Quick Tips & Safety Warnings
- ⚠️ Torque lugs in a star pattern to 165 ft-lbs (224 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2025 Ford F-600 — Frequently Asked Questions
What is the bolt pattern for a 2025 Ford F-600?
The 2025 Ford F-600 uses a 8x170 bolt pattern (also called lug pattern or PCD). The center bore is 125.2mm and the offset is Not Applicablemm.
What other years of Ford F-600 have the same bolt pattern as the 2025?
The Ford F-600 uses the 8x170 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
What is the center bore of a 2025 Ford F-600?
The factory center bore (hub bore) for the 2025 Ford F-600 is 125.2mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What does Not Applicablemm offset mean for the 2025 F-600?
An offset of Not Applicablemm means the wheel's mounting surface is Not Applicablemm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Ford.
How do I measure the bolt pattern on my 2025 Ford?
The 2025 F-600 uses a 8x170 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
How tight should I torque the lug nuts on a 2025 Ford F-600?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →