2008 Ford F450 Super Duty Crew Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2008 Ford F450 Super Duty Crew Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 10x225 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 170.1 mm |
| Offset (ET) | 0 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2008 F450 Super Duty Crew Cab — Year-Specific Fitment Context
The 2008 model year marks the beginning of the Ford F450 Super Duty Crew Cab's 10x225 bolt pattern era, which continued through 2024 (17 consecutive years). Wheels from any 2008–2024 Ford F450 Super Duty Crew Cab are cross-compatible with the 2008 model.
Ford F450 Super Duty Crew Cab Bolt Pattern by Year
The table below shows how the F450 Super Duty Crew Cab's wheel specifications have changed over the years. The 2008 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| ▸ 2008 | 10x225 | 170.1 | 0 |
| 2009 | 10x225 | 170.1 | 0 |
| 2010 | 10x225 | 170.1 | 0 |
| 2011 | 10x225 | 170.1 | 0 |
| 2012 | 10x225 | 170.1 | 0 |
| 2013 | 10x225 | 170.1 | 0 |
| 2014 | 10x225 | 170.1 | 0 |
| 2015 | 10x225 | 170.1 | 0 |
| 2016 | 10x225 | 170.1 | 0 |
| 2017 | 10x225 | 170.1 | 0 |
| 2018 | 10x225 | 170.1 | 0 |
| 2019 | 10x225 | 170.1 | 0 |
| 2020 | 10x225 | 170.1 | 0 |
| 2021 | 10x225 | 170.1 | 0 |
| 2022 | 10x225 | 170.1 | 0 |
| 2024 | 10x225 | 170.1 | 0 |
10x225 Pattern Context
This bolt pattern appears on 20 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 10x225:
Expert Buying Guide for 2008 Ford F450 Super Duty Crew Cab
For the 2008 Ford F450 Super Duty Crew Cab, the 10x225 bolt pattern and 170.1mm center bore are critical. Aftermarket wheels often have a larger center bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. The offset is sensitive; stock is 0mm, and deviations affect scrub radius and tire clearance. Use only 14x1.5 lug nuts with the correct seat (cone or ball) to avoid wheel loosening. Always verify lug nut seating and torque to spec. Wheels from 2008–2024 F450 Super Duty are direct fit.
Historical Fitment Data Reference
In our dataset, Ford F450 Super Duty Crew Cab appears from 2008 to 2024 (16 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using wheels with a center bore larger than 170.1mm without hub-centric rings; vibration and stress on studs can occur.
- ✅ Check offset carefully: even +5mm or -5mm can cause rubbing on suspension or body components.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2008 Ford F450 Super Duty Crew Cab — Frequently Asked Questions
What is the bolt pattern for a 2008 Ford F450 Super Duty Crew Cab?
The 2008 Ford F450 Super Duty Crew Cab uses a 10x225 bolt pattern (also called lug pattern or PCD). The center bore is 170.1mm and the offset is 0mm.
What other years of Ford F450 Super Duty Crew Cab have the same bolt pattern as the 2008?
The Ford F450 Super Duty Crew Cab uses the 10x225 pattern from 2008 through 2024. Wheels from any of these model years are dimensionally compatible with the 2008, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2008 Ford F450 Super Duty Crew Cab?
Absolutely. Just ensure the aftermarket wheels have a 10x225 bolt pattern, an offset near 0mm, and a center bore of at least 170.1mm (using hub rings if larger).
What is the center bore of a 2008 Ford F450 Super Duty Crew Cab?
The factory center bore (hub bore) for the 2008 Ford F450 Super Duty Crew Cab is 170.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Do 2008 Ford F450 Super Duty Crew Cabs use lug bolts or lug nuts?
The 2008 F450 Super Duty Crew Cab requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Can I use spacers on my 2008 Ford F450 Super Duty Crew Cab?
Yes, but ensure the wheel spacers match the 10x225 bolt pattern and 170.1mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset