2025 Ford GT MKII Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2025 Ford GT MKII, along with offset and center bore data.
2025 Ford GT MKII Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 6x135 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 87.1 mm |
| Offset (ET) | Not Applicable |
| Torque Specs | 150 ft-lbs (204 Nm) |
2025 GT MKII — Year-Specific Fitment Context
The 2025 model year is the final year of the Ford GT MKII's 6x135 bolt pattern run (since 2024). Wheels from any 2024–2025 Ford GT MKII are cross-compatible with the 2025 model.
Ford GT MKII Bolt Pattern by Year
The table below shows how the GT MKII's wheel specifications have changed over the years. The 2025 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2024 | 6x135 | 87.1 | Not Applicable |
| ▸ 2025 | 6x135 | 87.1 | Not Applicable |
6x135 Pattern Context
This bolt pattern appears on 155 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 6x135:
Quick Tips & Safety Warnings
- ⚠️ Torque lugs in a star pattern to 150 ft-lbs (204 Nm), then re-check torque after 50-100 km (30-60 miles).
2025 Ford GT MKII — Frequently Asked Questions
What is the bolt pattern for a 2025 Ford GT MKII?
The 2025 Ford GT MKII uses a 6x135 bolt pattern (also called lug pattern or PCD). The center bore is 87.1mm and the offset is Not Applicablemm.
What other years of Ford GT MKII have the same bolt pattern as the 2025?
The Ford GT MKII uses the 6x135 pattern from 2024 through 2025. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
Do 2025 Ford GT MKIIs use lug bolts or lug nuts?
The 2025 GT MKII requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Will wheels from another Ford fit my 2025 GT MKII?
Only if they share the exact same 6x135 bolt pattern, a compatible offset, and a center bore equal to or larger than 87.1mm.
How tight should I torque the lug nuts on a 2025 Ford GT MKII?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Can I put aftermarket wheels on my 2025 Ford GT MKII?
Absolutely. Just ensure the aftermarket wheels have a 6x135 bolt pattern, an offset near Not Applicablemm, and a center bore of at least 87.1mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset