2006 Ford Ranger Regular Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2006 Ford Ranger Regular Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 1/2 20 |
| Center Bore (CB) | 70.5 mm |
| Offset (ET) | 12-20 |
| Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2006 Ranger Regular Cab — Year-Specific Fitment Context
The 2006 Ford Ranger Regular Cab is in year 15 of 20 using the 5x114.3 pattern (1992–2011). Wheels from any 1992–2011 Ford Ranger Regular Cab are cross-compatible with the 2006 model.
Ford Ranger Regular Cab Bolt Pattern by Year
The table below shows how the Ranger Regular Cab's wheel specifications have changed over the years. The 2006 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x114.3 | 70.5 | 12-20 |
| 1993 | 5x114.3 | 70.5 | 12-20 |
| 1994 | 5x114.3 | 70.5 | 12-20 |
| 1995 | 5x114.3 | 70.5 | 12-20 |
| 1996 | 5x114.3 | 70.5 | 12-20 |
| 1997 | 5x114.3 | 70.5 | 12-20 |
| 1998 | 5x114.3 | 70.5 | 12-20 |
| 1999 | 5x114.3 | 70.5 | 12-20 |
| 2000 | 5x114.3 | 70.5 | 12-20 |
| 2001 | 5x114.3 | 70.5 | 12-20 |
| 2002 | 5x114.3 | 70.5 | 12-20 |
| 2003 | 5x114.3 | 70.5 | 12-20 |
| 2004 | 5x114.3 | 70.5 | 12-20 |
| 2005 | 5x114.3 | 70.5 | 12-20 |
| ▸ 2006 | 5x114.3 | 70.5 | 12-20 |
| 2007 | 5x114.3 | 70.5 | 12-20 |
| 2008 | 5x114.3 | 70.5 | 12-20 |
| 2009 | 5x114.3 | 70.5 | 12-20 |
| 2010 | 5x114.3 | 70.5 | 12-20 |
| 2011 | 5x114.3 | 70.5 | 12-20 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2006 Ford Ranger Regular Cab
For your 2006 Ford Ranger Regular Cab, the critical fitment specs are: bolt pattern 5x114.3, center bore 70.5mm, offset 12-20mm, and lug nut size 1/2-20. The 70.5mm center bore is hub-centric; aftermarket wheels with larger bores require hub-centric rings to prevent vibrations and ensure proper load transfer. Offset outside 12-20mm may cause rubbing or clearance issues. Always use the correct lug nuts: 1/2-20 thread with a conical (60-degree) seat. Never use ball-seat lug nuts on this vehicle. Re-torque after 50-100 miles. Wheels from 1992-2011 Ford Rangers are cross-compatible.
Historical Fitment Data Reference
In our dataset, Ford Ranger Regular Cab appears from 1992 to 2011 (20 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 32.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 85-105 ft-lbs after 50-100 miles of driving.
- ✅ Avoid wheels with offset below 12mm (too aggressive) or above 20mm (too tucked) to prevent rubbing or brake clearance issues.
- ✅ If using aftermarket wheels, verify center bore is at least 70.5mm; use hub-centric rings if larger to avoid vibrations.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2006 Ford Ranger Regular Cab — Frequently Asked Questions
What is the bolt pattern for a 2006 Ford Ranger Regular Cab?
The 2006 Ford Ranger Regular Cab uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 70.5mm and the offset is 12-20mm.
What other years of Ford Ranger Regular Cab have the same bolt pattern as the 2006?
The Ford Ranger Regular Cab uses the 5x114.3 pattern from 1992 through 2011. Wheels from any of these model years are dimensionally compatible with the 2006, provided the offset and center bore also match.
What does 12-20mm offset mean for the 2006 Ranger Regular Cab?
An offset of 12-20mm means the wheel's mounting surface is 12-20mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Ford.
What is the PCD for a 2006 Ford Ranger Regular Cab?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2006 Ranger Regular Cab, the PCD is 5x114.3.
Can I put aftermarket wheels on my 2006 Ford Ranger Regular Cab?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 12-20mm, and a center bore of at least 70.5mm (using hub rings if larger).
Why is matching the 70.5mm center bore important for the 2006 Ranger Regular Cab?
The 70.5mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset