1993 Ford Ranger Regular Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1993 Ford Ranger Regular Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 1/2 20 |
| Center Bore (CB) | 70.5 mm |
| Offset (ET) | 12-20 |
| Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
1993 Ranger Regular Cab — Year-Specific Fitment Context
The 1993 Ford Ranger Regular Cab is in year 2 of 20 using the 5x114.3 pattern (1992–2011). Wheels from any 1992–2011 Ford Ranger Regular Cab are cross-compatible with the 1993 model.
Ford Ranger Regular Cab Bolt Pattern by Year
The table below shows how the Ranger Regular Cab's wheel specifications have changed over the years. The 1993 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x114.3 | 70.5 | 12-20 |
| ▸ 1993 | 5x114.3 | 70.5 | 12-20 |
| 1994 | 5x114.3 | 70.5 | 12-20 |
| 1995 | 5x114.3 | 70.5 | 12-20 |
| 1996 | 5x114.3 | 70.5 | 12-20 |
| 1997 | 5x114.3 | 70.5 | 12-20 |
| 1998 | 5x114.3 | 70.5 | 12-20 |
| 1999 | 5x114.3 | 70.5 | 12-20 |
| 2000 | 5x114.3 | 70.5 | 12-20 |
| 2001 | 5x114.3 | 70.5 | 12-20 |
| 2002 | 5x114.3 | 70.5 | 12-20 |
| 2003 | 5x114.3 | 70.5 | 12-20 |
| 2004 | 5x114.3 | 70.5 | 12-20 |
| 2005 | 5x114.3 | 70.5 | 12-20 |
| 2006 | 5x114.3 | 70.5 | 12-20 |
| 2007 | 5x114.3 | 70.5 | 12-20 |
| 2008 | 5x114.3 | 70.5 | 12-20 |
| 2009 | 5x114.3 | 70.5 | 12-20 |
| 2010 | 5x114.3 | 70.5 | 12-20 |
| 2011 | 5x114.3 | 70.5 | 12-20 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 1993 Ford Ranger Regular Cab
For your 1993 Ford Ranger Regular Cab, the bolt pattern is 5x114.3mm with a critical center bore of 70.5mm. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. Offset must stay within 12-20mm; deviations risk rubbing or bearing damage. Always use the correct lug nut thread pitch (1/2-20) and seat type—factory wheels use a cone seat, while aftermarket may require ball or flat seats. Mismatched lug nuts can cause wheel loss. Re-torque after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Ford Ranger Regular Cab appears from 1992 to 2011 (20 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 32.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 85-105 ft-lbs after 50-100 miles to account for settling.
- ✅ Avoid using wheels from 2012+ Rangers; they switched to a 5x4.5 pattern.
- ✅ Check wheel backspacing; 4.5-5 inches is typical for this offset range.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1993 Ford Ranger Regular Cab — Frequently Asked Questions
What is the bolt pattern for a 1993 Ford Ranger Regular Cab?
The 1993 Ford Ranger Regular Cab uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 70.5mm and the offset is 12-20mm.
What other years of Ford Ranger Regular Cab have the same bolt pattern as the 1993?
The Ford Ranger Regular Cab uses the 5x114.3 pattern from 1992 through 2011. Wheels from any of these model years are dimensionally compatible with the 1993, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 1993 Ford Ranger Regular Cab?
Refer to your owner's manual for exact specs, but always tighten the 1/2 20 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Do 1993 Ford Ranger Regular Cabs use lug bolts or lug nuts?
The 1993 Ranger Regular Cab requires 1/2 20 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the PCD for a 1993 Ford Ranger Regular Cab?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 1993 Ranger Regular Cab, the PCD is 5x114.3.
How do I measure the bolt pattern on my 1993 Ford?
The 1993 Ranger Regular Cab uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset