2026 Ford Ranger Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Ford Ranger is 6x139.7 (6x5.5"). It has a center bore of 93.1 mm, an offset range of 55, and utilizes 14x1.5 (Flat seat, 21mm hex) fasteners tightened to 100 ft-lbs (135 Nm).
2026 Ford Ranger Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Center Bore (Hub Bore) | 93.1 mm |
| Offset Range (ET) | 55 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2026 Ranger — Year-Specific Fitment Context
The 2026 model year is the final year of the Ford Ranger's 6x139.7 bolt pattern run (since 2024). Wheels from any 2024–2026 Ford Ranger are cross-compatible with the 2026 model.
Ford Ranger Bolt Pattern by Year
Looking for all generations? View the complete Ford Ranger (2024–2026) Bolt Pattern & Generation Guide →
The table below shows how the Ranger's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 Ford Ranger Wheel Interchange & Donor Fitment Guide (6x139.7)
The 6x139.7 bolt pattern is shared by 1102 vehicles in our database (common). For safe wheel swaps on the 2026 Ford Ranger, donor rims must match the 6x139.7 PCD and have a center bore of at least 93.1 mm:
DIRECT HUB MATCH Same 6x139.7 Pattern & Exact 93.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 1997 MAZDA B-Series Cab Plus | 93.1 mm (Exact) | 25 | N 12x1.50 (Cone) |
| 1997 MAZDA B-Series Regular Cab | 93.1 mm (Exact) | 25 | N 12x1.50 (Cone) |
| 2021 Ford Bronco | 93.1 mm (Exact) | 55 | 12x1.5 (Cone) |
| 2019 Ford Ranger SuperCab | 93.1 mm (Exact) | 55 | 12x1.5 (Cone) |
| 2024 Ford Ranger SuperCrew | 93.1 mm (Exact) | 55 | 12x1.5 (Cone) |
HUB RING FITMENT Same 6x139.7 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2025 Isuzu NPR | 110 mm | 110mm → 93.1mm |
Not Applicable |
| 2025 Isuzu NPR-HD | 110 mm | 110mm → 93.1mm |
Not Applicable |
| 2008 Lexus GX | 106.1 mm | 106.1mm → 93.1mm |
25 |
| 2022 Lexus LX | 95.1 mm | 95.1mm → 93.1mm |
60 |
| 2006 Nissan Armada | 110.1 mm | 110.1mm → 93.1mm |
24 |
| 1994 Nissan Pathfinder | 110.0 mm | 110.0mm → 93.1mm |
40 |
Quick Tips & Safety Warnings
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Ford Ranger — Frequently Asked Questions
What is the bolt pattern for a 2026 Ford Ranger?
The 2026 Ford Ranger uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 93.1mm and the offset is 55mm.
What other years of Ford Ranger have the same bolt pattern as the 2026?
The Ford Ranger uses the 6x139.7 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
Why is matching the 93.1mm center bore important for the 2026 Ranger?
The 93.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the factory wheel offset for a 2026 Ford Ranger?
The OEM offset for the 2026 Ranger is typically around 55mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I put aftermarket wheels on my 2026 Ford Ranger?
Absolutely. Just ensure the aftermarket wheels have a 6x139.7 bolt pattern, an offset near 55mm, and a center bore of at least 93.1mm (using hub rings if larger).
What lug nut size does the 2026 Ford Ranger use?
The 2026 Ford Ranger uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →