2026 Freightliner 108SD Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Freightliner 108SD is 10x285.75. It has a center bore of 220.1 mm, an offset range of Not Applicable, and utilizes 22x1.5 (Flat seat, 33mm hex) fasteners tightened to 450-500 ft-lbs (610-678 Nm).
2026 Freightliner 108SD Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 10x285.75 |
|---|---|
| Center Bore (Hub Bore) | 220.1 mm |
| Offset Range (ET) | Not Applicable |
| Thread Size (Lug Nut / Bolt) | 22x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 33mm |
| Wheel Torque Specs | 450-500 ft-lbs (610-678 Nm) |
2026 108SD — Year-Specific Fitment Context
The 2026 model year is the final year of the Freightliner 108SD's 10x285.75 bolt pattern run (since 2024). Wheels from any 2024–2026 Freightliner 108SD are cross-compatible with the 2026 model.
Freightliner 108SD Bolt Pattern by Year
Looking for all generations? View the complete Freightliner 108SD (2024–2026) Bolt Pattern & Generation Guide →
The table below shows how the 108SD's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 Freightliner 108SD Wheel Interchange & Donor Fitment Guide (10x285.75)
The 10x285.75 bolt pattern is shared by 218 vehicles in our database (moderately common). For safe wheel swaps on the 2026 Freightliner 108SD, donor rims must match the 10x285.75 PCD and have a center bore of at least 220.1 mm:
DIRECT HUB MATCH Same 10x285.75 Pattern & Exact 220.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2026 Freightliner CST120 | 220 mm (Exact) | Not Applicable | 22x1.5 (Cone) |
| 2024 Freightliner eCascadia | 220 mm (Exact) | Not Applicable | 22x1.5 (Cone) |
| 2024 Freightliner eM2 106 | 220 mm (Exact) | Not Applicable | 22x1.5 (Flat) |
| 2024 Freightliner FB 65 Chassis | 220 mm (Exact) | Not Applicable | 22x1.5 (Flat) |
| 2024 Freightliner FL106 | 220.1 mm (Exact) | Not Applicable | 22x1.5 (Cone) |
| 2024 Freightliner FL112 | 220 mm (Exact) | Not Applicable | 22x1.5 (Cone) |
HUB RING FITMENT Same 10x285.75 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2024 Freightliner EF Front Engine Bus Chassis | 221.1 mm | 221.1mm → 220.1mm |
Not Applicable |
| 2024 Freightliner EFX Front Engine Bus Chassis | 222 mm | 222mm → 220.1mm |
Not Applicable |
| 2024 Freightliner MD109 | 222 mm | 222mm → 220.1mm |
Not Applicable |
| 2024 Freightliner NGE (956) Platform Truck COE | 221 mm | 221mm → 220.1mm |
Not Applicable |
| 2024 Freightliner S2 106 Bus Chassis | 221.1 mm | 221.1mm → 220.1mm |
Not Applicable |
| 2024 Volvo VAH | 221 mm | 221mm → 220.1mm |
Not Applicable |
Quick Tips & Safety Warnings
- ⚠️ Torque lugs in a star pattern to 450-500 ft-lbs (610-678 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Freightliner 108SD — Frequently Asked Questions
What is the bolt pattern for a 2026 Freightliner 108SD?
The 2026 Freightliner 108SD uses a 10x285.75 bolt pattern (also called lug pattern or PCD). The center bore is 220.1mm and the offset is Not Applicablemm.
What other years of Freightliner 108SD have the same bolt pattern as the 2026?
The Freightliner 108SD uses the 10x285.75 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2026 Freightliner 108SD?
Absolutely. Just ensure the aftermarket wheels have a 10x285.75 bolt pattern, an offset near Not Applicablemm, and a center bore of at least 220.1mm (using hub rings if larger).
How tight should I torque the lug nuts on a 2026 Freightliner 108SD?
Refer to your owner's manual for exact specs, but always tighten the 22x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the center bore of a 2026 Freightliner 108SD?
The factory center bore (hub bore) for the 2026 Freightliner 108SD is 220.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Will wheels from another Freightliner fit my 2026 108SD?
Only if they share the exact same 10x285.75 bolt pattern, a compatible offset, and a center bore equal to or larger than 220.1mm.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →