2025 Freightliner FLS112 Legacy Bolt Pattern

Quick Answer: The factory bolt pattern (lug pattern) for a 2025 Freightliner FLS112 Legacy is 10x285.75. It has a center bore of 220.1 mm, an offset range of Not Applicable, and utilizes 22x1.5 (Cone seat, 33mm hex) fasteners tightened to 450-500 ft-lbs (610-678 Nm).

2025 Freightliner FLS112 Legacy Wheel Fitment Specs

Bolt Pattern (Lug Pattern) 10x285.75
Center Bore (Hub Bore) 220.1 mm
Offset Range (ET) Not Applicable
Thread Size (Lug Nut / Bolt) 22x1.5
Fastener Seat Type Conical 60° (Cone / Tapered)
Lug Wrench / Socket Hex Size 33mm
Wheel Torque Specs 450-500 ft-lbs (610-678 Nm)
🛠️ Managing a shop, wheel inventory, or app? Stop searching one by one.
Download 12,902 Vehicle Database (CSV) →
🔍 Check fitment for other vehicles using our Ultimate Bolt Pattern Finder tool →

2025 FLS112 Legacy — Year-Specific Fitment Context

The 2025 Freightliner FLS112 Legacy is in year 2 of 3 using the 10x285.75 pattern (2024–2026). Wheels from any 2024–2026 Freightliner FLS112 Legacy are cross-compatible with the 2025 model.

Freightliner FLS112 Legacy Bolt Pattern by Year

Looking for all generations? View the complete Freightliner FLS112 Legacy (2024–2026) Bolt Pattern & Generation Guide →

The table below shows how the FLS112 Legacy's wheel specifications have changed over the years. The 2025 model year is highlighted.

Year Bolt Pattern Center Bore Offset
2024 10x285.75 220.1 Not Applicable
▸ 2025 10x285.75 220.1 Not Applicable
2026 10x285.75 220.1 Not Applicable

2025 Freightliner FLS112 Legacy Wheel Interchange & Donor Fitment Guide (10x285.75)

The 10x285.75 bolt pattern is shared by 218 vehicles in our database (moderately common). For safe wheel swaps on the 2025 Freightliner FLS112 Legacy, donor rims must match the 10x285.75 PCD and have a center bore of at least 220.1 mm:

DIRECT HUB MATCH Same 10x285.75 Pattern & Exact 220.1mm Center Bore (No Hub Rings Needed)

Compatible Donor Vehicle Center Bore OEM Offset (ET) Lug Thread & Seat
2024 Freightliner XBR Rail Rear Engine Shuttle Bus Chassis 220 mm (Exact) Not Applicable 22x1.5 (Cone)
2025 Freightliner XBS Straight Rail Rear Engine Shuttle Bus Chassis 220.1 mm (Exact) Not Applicable M22x1.5 (Flat)
2024 Freightliner XC Chassis 220 mm (Exact) Not Applicable 22x1.5 (Cone)
2024 Freightliner XC Formed Rail Rear Engine Motor Home Chassis 220.1 mm (Exact) Not Applicable 22x1.5 (Flat)
2024 Freightliner XC Modular Rail Rear Engine Motor Home Chassis 220 mm (Exact) Not Applicable 22x1.5 (Flat)
2024 Freightliner XC Raised Rail (Lowered Engine) Rear Engine Motor Home Chassis 220.1 mm (Exact) Not Applicable 22x1.5 (Flat)

HUB RING FITMENT Same 10x285.75 Pattern with Larger Center Bore (Hub-Centric Ring Required)

Donor Vehicle Donor Bore Required Hub Ring (OD → ID) OEM Offset (ET)
2024 Volvo VAH 221 mm 221mm → 220.1mm Not Applicable
2024 Volvo VHD 222 mm 222mm → 220.1mm Not Applicable
2024 Chevrolet 6500XD 222 mm 222mm → 220.1mm Not Applicable
2024 Freightliner EF Front Engine Bus Chassis 221.1 mm 221.1mm → 220.1mm Not Applicable
2024 Freightliner EFX Front Engine Bus Chassis 222 mm 222mm → 220.1mm Not Applicable
2024 Freightliner MD109 222 mm 222mm → 220.1mm Not Applicable
Looking for all models? View the complete directory of vehicles with 10x285.75 bolt pattern →

Quick Tips & Safety Warnings

Ready to upgrade or perform maintenance?

🛒 Shop Tools & Accessories on Amazon

As an Amazon Associate, I earn from qualifying purchases.

2025 Freightliner FLS112 Legacy — Frequently Asked Questions

What is the bolt pattern for a 2025 Freightliner FLS112 Legacy?

The 2025 Freightliner FLS112 Legacy uses a 10x285.75 bolt pattern (also called lug pattern or PCD). The center bore is 220.1mm and the offset is Not Applicablemm.

What other years of Freightliner FLS112 Legacy have the same bolt pattern as the 2025?

The Freightliner FLS112 Legacy uses the 10x285.75 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.

How tight should I torque the lug nuts on a 2025 Freightliner FLS112 Legacy?

Refer to your owner's manual for exact specs, but always tighten the 22x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.

What is the factory wheel offset for a 2025 Freightliner FLS112 Legacy?

The OEM offset for the 2025 FLS112 Legacy is typically around Not Applicablemm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.

What does Not Applicablemm offset mean for the 2025 FLS112 Legacy?

An offset of Not Applicablemm means the wheel's mounting surface is Not Applicablemm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Freightliner.

What is the PCD for a 2025 Freightliner FLS112 Legacy?

PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2025 FLS112 Legacy, the PCD is 10x285.75.

For Tire & Wheel Shops, Shopify Stores & Developers

Running a Tire Shop or Wheel Store?

Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.

Get Master Spreadsheet (CSV) →
Confidence Level
Medium
Verified Source
Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last Updated
2026-11-18

Freightliner FLS112 Legacy By Year

2024 2025 2026

Other Freightliner Models

114SD B2 106 Electric Conventional Chassis C112 CST112 EF Front Engine Bus Chassis FB 65 Chassis FS 65 Chassis MBO Chassis MD109 MT 45 HEV Chassis MT 55G Front Gasoline Engine Walk in Van Chassis OMC Chassis S2LG 106 Sprinter 3500 Cargo Sprinter 4500 Crew XC-F Formed Rail Rear Engine Motor Home Chassis XC-M Modular Rail Rear Engine Motor Home Chassis XC-S Straight Rail Rear Engine Motor Home Chassis XCA Chassis eSprinter

Popular Vehicle Fitment

▶ Ford Mustang Specs ▶ Chevy Tahoe Specs ▶ Honda Civic Specs ▶ Ford F-150 Specs ▶ Toyota Camry Specs

Common Bolt Patterns

▶ 5x114.3 (5x4.5") ▶ 6x139.7 (6x5.5") ▶ 5x120 ▶ 5x127 (5x5") ▶ 5x112 (European)