2025 Freightliner HDX Rear Engine Bus Chassis Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2025 Freightliner HDX Rear Engine Bus Chassis is 10x285.75. It has a center bore of 220.1 mm, an offset range of Not Applicable, and utilizes 22x1.5 (Flat seat, 33mm hex) fasteners tightened to 450-500 ft-lbs (610-678 Nm).
2025 Freightliner HDX Rear Engine Bus Chassis Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 10x285.75 |
|---|---|
| Center Bore (Hub Bore) | 220.1 mm |
| Offset Range (ET) | Not Applicable |
| Thread Size (Lug Nut / Bolt) | 22x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 33mm |
| Wheel Torque Specs | 450-500 ft-lbs (610-678 Nm) |
2025 HDX Rear Engine Bus Chassis — Year-Specific Fitment Context
The 2025 Freightliner HDX Rear Engine Bus Chassis is in year 2 of 3 using the 10x285.75 pattern (2024–2026). Wheels from any 2024–2026 Freightliner HDX Rear Engine Bus Chassis are cross-compatible with the 2025 model.
Freightliner HDX Rear Engine Bus Chassis Bolt Pattern by Year
Looking for all generations? View the complete Freightliner HDX Rear Engine Bus Chassis (2024–2026) Bolt Pattern & Generation Guide →
The table below shows how the HDX Rear Engine Bus Chassis's wheel specifications have changed over the years. The 2025 model year is highlighted.
2025 Freightliner HDX Rear Engine Bus Chassis Wheel Interchange & Donor Fitment Guide (10x285.75)
The 10x285.75 bolt pattern is shared by 218 vehicles in our database (moderately common). For safe wheel swaps on the 2025 Freightliner HDX Rear Engine Bus Chassis, donor rims must match the 10x285.75 PCD and have a center bore of at least 220.1 mm:
DIRECT HUB MATCH Same 10x285.75 Pattern & Exact 220.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2026 Freightliner XC-S Straight Rail Rear Engine Motor Home Chassis | 220.1 mm (Exact) | Not Applicable | 22x1.5 (Cone) |
| 2024 Freightliner XCA Chassis | 220.1 mm (Exact) | Not Applicable | 22x1.5 (Cone) |
| 2024 Isuzu FVR | 220 mm (Exact) | Not Applicable | M22x1.5 (Flat) |
| 2024 Volvo VN | 220 mm (Exact) | Not Applicable | 22x1.5 (Flat) |
| 2024 Volvo VNL | 220 mm (Exact) | Not Applicable | 22x1.5 (Flat) |
| 2025 Volvo VNL (4) | 220 mm (Exact) | Not Applicable | 22x1.5 (Flat) |
HUB RING FITMENT Same 10x285.75 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2024 Volvo VAH | 221 mm | 221mm → 220.1mm |
Not Applicable |
| 2024 Volvo VHD | 222 mm | 222mm → 220.1mm |
Not Applicable |
| 2024 Chevrolet 6500XD | 222 mm | 222mm → 220.1mm |
Not Applicable |
| 2024 Freightliner EF Front Engine Bus Chassis | 221.1 mm | 221.1mm → 220.1mm |
Not Applicable |
| 2024 Freightliner EFX Front Engine Bus Chassis | 222 mm | 222mm → 220.1mm |
Not Applicable |
| 2024 Freightliner MD109 | 222 mm | 222mm → 220.1mm |
Not Applicable |
Quick Tips & Safety Warnings
- ⚠️ Torque lugs in a star pattern to 450-500 ft-lbs (610-678 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2025 Freightliner HDX Rear Engine Bus Chassis — Frequently Asked Questions
What is the bolt pattern for a 2025 Freightliner HDX Rear Engine Bus Chassis?
The 2025 Freightliner HDX Rear Engine Bus Chassis uses a 10x285.75 bolt pattern (also called lug pattern or PCD). The center bore is 220.1mm and the offset is Not Applicablemm.
What other years of Freightliner HDX Rear Engine Bus Chassis have the same bolt pattern as the 2025?
The Freightliner HDX Rear Engine Bus Chassis uses the 10x285.75 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
Will wheels from another Freightliner fit my 2025 HDX Rear Engine Bus Chassis?
Only if they share the exact same 10x285.75 bolt pattern, a compatible offset, and a center bore equal to or larger than 220.1mm.
Can I put aftermarket wheels on my 2025 Freightliner HDX Rear Engine Bus Chassis?
Absolutely. Just ensure the aftermarket wheels have a 10x285.75 bolt pattern, an offset near Not Applicablemm, and a center bore of at least 220.1mm (using hub rings if larger).
How do I measure the bolt pattern on my 2025 Freightliner?
The 2025 HDX Rear Engine Bus Chassis uses a 10x285.75 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Do 2025 Freightliner HDX Rear Engine Bus Chassiss use lug bolts or lug nuts?
The 2025 HDX Rear Engine Bus Chassis requires 22x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →