2025 Freightliner MT 35 Chassis Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2025 Freightliner MT 35 Chassis, along with offset and center bore data.
2025 Freightliner MT 35 Chassis Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 8x275 |
|---|---|
| Lug Nut / Bolt Size | 22x1.5 |
| Center Bore (CB) | 161 mm |
| Offset (ET) | Not Applicable |
| Torque Specs | 450-500 ft-lbs (610-678 Nm) |
2025 MT 35 Chassis — Year-Specific Fitment Context
The 2025 model year is the final year of the Freightliner MT 35 Chassis's 8x275 bolt pattern run (since 2024). Wheels from any 2024–2025 Freightliner MT 35 Chassis are cross-compatible with the 2025 model.
Freightliner MT 35 Chassis Bolt Pattern by Year
The table below shows how the MT 35 Chassis's wheel specifications have changed over the years. The 2025 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2024 | 8x275 | 161 | Not Applicable |
| ▸ 2025 | 8x275 | 161 | Not Applicable |
8x275 Pattern Context
This bolt pattern appears on 6 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 8x275:
Quick Tips & Safety Warnings
- ⚠️ Torque lugs in a star pattern to 450-500 ft-lbs (610-678 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
2025 Freightliner MT 35 Chassis — Frequently Asked Questions
What is the bolt pattern for a 2025 Freightliner MT 35 Chassis?
The 2025 Freightliner MT 35 Chassis uses a 8x275 bolt pattern (also called lug pattern or PCD). The center bore is 161mm and the offset is Not Applicablemm.
What other years of Freightliner MT 35 Chassis have the same bolt pattern as the 2025?
The Freightliner MT 35 Chassis uses the 8x275 pattern from 2024 through 2025. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
What is the PCD for a 2025 Freightliner MT 35 Chassis?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2025 MT 35 Chassis, the PCD is 8x275.
Do 2025 Freightliner MT 35 Chassiss use lug bolts or lug nuts?
The 2025 MT 35 Chassis requires 22x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the center bore of a 2025 Freightliner MT 35 Chassis?
The factory center bore (hub bore) for the 2025 Freightliner MT 35 Chassis is 161mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Can I put aftermarket wheels on my 2025 Freightliner MT 35 Chassis?
Absolutely. Just ensure the aftermarket wheels have a 8x275 bolt pattern, an offset near Not Applicablemm, and a center bore of at least 161mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset