2026 Freightliner MT 35 Chassis Bolt Pattern

Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Freightliner MT 35 Chassis is 8x275. It has a center bore of 161 mm, an offset range of Not Applicable, and utilizes 22x1.5 (Flat seat, 33mm hex) fasteners tightened to 450-500 ft-lbs (610-678 Nm).

2026 Freightliner MT 35 Chassis Wheel Fitment Specs

Bolt Pattern (Lug Pattern) 8x275
Center Bore (Hub Bore) 161 mm
Offset Range (ET) Not Applicable
Thread Size (Lug Nut / Bolt) 22x1.5
Fastener Seat Type Flat / Mag Seat (Washer)
Lug Wrench / Socket Hex Size 33mm
Wheel Torque Specs 450-500 ft-lbs (610-678 Nm)
🛠️ Managing a shop, wheel inventory, or app? Stop searching one by one.
Download 12,902 Vehicle Database (CSV) →
🔍 Check fitment for other vehicles using our Ultimate Bolt Pattern Finder tool →

2026 MT 35 Chassis — Year-Specific Fitment Context

The 2026 model year is the final year of the Freightliner MT 35 Chassis's 8x275 bolt pattern run (since 2024). Wheels from any 2024–2026 Freightliner MT 35 Chassis are cross-compatible with the 2026 model.

Freightliner MT 35 Chassis Bolt Pattern by Year

Looking for all generations? View the complete Freightliner MT 35 Chassis (2024–2026) Bolt Pattern & Generation Guide →

The table below shows how the MT 35 Chassis's wheel specifications have changed over the years. The 2026 model year is highlighted.

Year Bolt Pattern Center Bore Offset
2024 8x275 161 Not Applicable
2025 8x275 161 Not Applicable
▸ 2026 8x275 161 Not Applicable

2026 Freightliner MT 35 Chassis Wheel Interchange & Donor Fitment Guide (8x275)

The 8x275 bolt pattern is shared by 8 vehicles in our database (uncommon). For safe wheel swaps on the 2026 Freightliner MT 35 Chassis, donor rims must match the 8x275 PCD and have a center bore of at least 161 mm:

DIRECT HUB MATCH Same 8x275 Pattern & Exact 161mm Center Bore (No Hub Rings Needed)

Compatible Donor Vehicle Center Bore OEM Offset (ET) Lug Thread & Seat
2025 Chevrolet 4500XD 161 mm (Exact) Not Applicable M22x1.5 (Flat)
2024 Freightliner Sport Chassis 161 mm (Exact) Not Applicable 22x1.5 (Flat)
Looking for all models? View the complete directory of vehicles with 8x275 bolt pattern →

Quick Tips & Safety Warnings

Ready to upgrade or perform maintenance?

🛒 Shop Tools & Accessories on Amazon

As an Amazon Associate, I earn from qualifying purchases.

2026 Freightliner MT 35 Chassis — Frequently Asked Questions

What is the bolt pattern for a 2026 Freightliner MT 35 Chassis?

The 2026 Freightliner MT 35 Chassis uses a 8x275 bolt pattern (also called lug pattern or PCD). The center bore is 161mm and the offset is Not Applicablemm.

What other years of Freightliner MT 35 Chassis have the same bolt pattern as the 2026?

The Freightliner MT 35 Chassis uses the 8x275 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.

What is the factory wheel offset for a 2026 Freightliner MT 35 Chassis?

The OEM offset for the 2026 MT 35 Chassis is typically around Not Applicablemm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.

What is the PCD for a 2026 Freightliner MT 35 Chassis?

PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2026 MT 35 Chassis, the PCD is 8x275.

What does Not Applicablemm offset mean for the 2026 MT 35 Chassis?

An offset of Not Applicablemm means the wheel's mounting surface is Not Applicablemm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Freightliner.

How tight should I torque the lug nuts on a 2026 Freightliner MT 35 Chassis?

Refer to your owner's manual for exact specs, but always tighten the 22x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.

For Tire & Wheel Shops, Shopify Stores & Developers

Running a Tire Shop or Wheel Store?

Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.

Get Master Spreadsheet (CSV) →
Confidence Level
Medium
Verified Source
Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last Updated
2026-11-18

Freightliner MT 35 Chassis By Year

2024 2025 2026

Other Freightliner Models

B2 Bus Chassis Columbia Coronado FL60 HDX Rear Engine Bus Chassis MC 45 Chassis MT 35 Chassis NGE (956) Platform Truck COE S2C 106 Conventional Cab & Chassis S2LG 106 Sprinter 1500 Passenger Sprinter 3500 Crew VCL Chassis XBP Rear Engine Commercial Bus Chassis XBS Straight Rail Rear Engine Shuttle Bus Chassis XC Raised Rail (Lowered Engine) Rear Engine Motor Home Chassis XC Raised Rail Rear Engine Motor Home Chassis XC-L Lowered Rail Rear Engine Motor Home Chassis XC-P Powerliner Raise Rail Rear Engine Motor Home Chassis XC-S Straight Rail Rear Engine Motor Home Chassis

Popular Vehicle Fitment

▶ Ford Mustang Specs ▶ Chevy Tahoe Specs ▶ Honda Civic Specs ▶ Ford F-150 Specs ▶ Toyota Camry Specs

Common Bolt Patterns

▶ 5x114.3 (5x4.5") ▶ 6x139.7 (6x5.5") ▶ 5x120 ▶ 5x127 (5x5") ▶ 5x112 (European)