2026 Freightliner MT45 Chassis Bolt Pattern

Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Freightliner MT45 Chassis is 10x285.75. It has a center bore of 220 mm, an offset range of Not Applicable, and utilizes 22x1.5 (Cone seat, 33mm hex) fasteners tightened to 450-500 ft-lbs (610-678 Nm).

2026 Freightliner MT45 Chassis Wheel Fitment Specs

Bolt Pattern (Lug Pattern) 10x285.75
Center Bore (Hub Bore) 220 mm
Offset Range (ET) Not Applicable
Thread Size (Lug Nut / Bolt) 22x1.5
Fastener Seat Type Conical 60° (Cone / Tapered)
Lug Wrench / Socket Hex Size 33mm
Wheel Torque Specs 450-500 ft-lbs (610-678 Nm)
🛠️ Managing a shop, wheel inventory, or app? Stop searching one by one.
Download 12,902 Vehicle Database (CSV) →
🔍 Check fitment for other vehicles using our Ultimate Bolt Pattern Finder tool →

2026 MT45 Chassis — Year-Specific Fitment Context

The 2026 model year is the final year of the Freightliner MT45 Chassis's 10x285.75 bolt pattern run (since 2024). Wheels from any 2024–2026 Freightliner MT45 Chassis are cross-compatible with the 2026 model.

Freightliner MT45 Chassis Bolt Pattern by Year

Looking for all generations? View the complete Freightliner MT45 Chassis (2024–2026) Bolt Pattern & Generation Guide →

The table below shows how the MT45 Chassis's wheel specifications have changed over the years. The 2026 model year is highlighted.

Year Bolt Pattern Center Bore Offset
2024 10x285.75 220 Not Applicable
2025 10x285.75 220 Not Applicable
▸ 2026 10x285.75 220 Not Applicable

2026 Freightliner MT45 Chassis Wheel Interchange & Donor Fitment Guide (10x285.75)

The 10x285.75 bolt pattern is shared by 218 vehicles in our database (moderately common). For safe wheel swaps on the 2026 Freightliner MT45 Chassis, donor rims must match the 10x285.75 PCD and have a center bore of at least 220 mm:

DIRECT HUB MATCH Same 10x285.75 Pattern & Exact 220mm Center Bore (No Hub Rings Needed)

Compatible Donor Vehicle Center Bore OEM Offset (ET) Lug Thread & Seat
2024 Freightliner FB 65 Chassis 220 mm (Exact) Not Applicable 22x1.5 (Flat)
2024 Freightliner FL106 220.1 mm (Exact) Not Applicable 22x1.5 (Cone)
2024 Freightliner FL112 220 mm (Exact) Not Applicable 22x1.5 (Cone)
2024 Freightliner FL60 220 mm (Exact) Not Applicable 22x1.5 (Cone)
2024 Freightliner FL70 220 mm (Exact) Not Applicable 22x1.5 (Cone)
2024 Freightliner FL80 220 mm (Exact) Not Applicable 22x1.5 (Cone)

HUB RING FITMENT Same 10x285.75 Pattern with Larger Center Bore (Hub-Centric Ring Required)

Donor Vehicle Donor Bore Required Hub Ring (OD → ID) OEM Offset (ET)
2024 Freightliner MD109 222 mm 222mm → 220mm Not Applicable
2024 Freightliner NGE (956) Platform Truck COE 221 mm 221mm → 220mm Not Applicable
2024 Freightliner S2 106 Bus Chassis 221.1 mm 221.1mm → 220mm Not Applicable
2024 Volvo VAH 221 mm 221mm → 220mm Not Applicable
2024 Volvo VHD 222 mm 222mm → 220mm Not Applicable
2024 Chevrolet 6500XD 222 mm 222mm → 220mm Not Applicable
Looking for all models? View the complete directory of vehicles with 10x285.75 bolt pattern →

Quick Tips & Safety Warnings

Ready to upgrade or perform maintenance?

🛒 Shop Tools & Accessories on Amazon

As an Amazon Associate, I earn from qualifying purchases.

2026 Freightliner MT45 Chassis — Frequently Asked Questions

What is the bolt pattern for a 2026 Freightliner MT45 Chassis?

The 2026 Freightliner MT45 Chassis uses a 10x285.75 bolt pattern (also called lug pattern or PCD). The center bore is 220mm and the offset is Not Applicablemm.

What other years of Freightliner MT45 Chassis have the same bolt pattern as the 2026?

The Freightliner MT45 Chassis uses the 10x285.75 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.

Do 2026 Freightliner MT45 Chassiss use lug bolts or lug nuts?

The 2026 MT45 Chassis requires 22x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.

What is the factory wheel offset for a 2026 Freightliner MT45 Chassis?

The OEM offset for the 2026 MT45 Chassis is typically around Not Applicablemm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.

What is the center bore of a 2026 Freightliner MT45 Chassis?

The factory center bore (hub bore) for the 2026 Freightliner MT45 Chassis is 220mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.

What does Not Applicablemm offset mean for the 2026 MT45 Chassis?

An offset of Not Applicablemm means the wheel's mounting surface is Not Applicablemm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Freightliner.

For Tire & Wheel Shops, Shopify Stores & Developers

Running a Tire Shop or Wheel Store?

Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.

Get Master Spreadsheet (CSV) →
Confidence Level
Medium
Verified Source
Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last Updated
2026-11-18

Freightliner MT45 Chassis By Year

2024 2025 2026

Other Freightliner Models

B2 106 Electric Conventional Chassis B2LPG 106 C112 Classic Condor FB 65 Chassis FL106 FL70 FL80 M-B MBO Chassis MC 45 Chassis MT 45G Front Gasoline Engine Walk in Van Chassis MT-55 HHV Chassis (Hydraulic Hybrid Vehicle) Sprinter 3500 Cargo Sprinter 3500 Crew XB Chassis XBS Straight Rail Rear Engine Shuttle Bus Chassis XC-F Formed Rail Rear Engine Motor Home Chassis eCascadia eM2 106

Popular Vehicle Fitment

▶ Ford Mustang Specs ▶ Chevy Tahoe Specs ▶ Honda Civic Specs ▶ Ford F-150 Specs ▶ Toyota Camry Specs

Common Bolt Patterns

▶ 5x114.3 (5x4.5") ▶ 6x139.7 (6x5.5") ▶ 5x120 ▶ 5x127 (5x5") ▶ 5x112 (European)