2025 Freightliner MT45 Chassis Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2025 Freightliner MT45 Chassis is 10x285.75. It has a center bore of 220 mm, an offset range of Not Applicable, and utilizes 22x1.5 (Cone seat, 33mm hex) fasteners tightened to 450-500 ft-lbs (610-678 Nm).
2025 Freightliner MT45 Chassis Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 10x285.75 |
|---|---|
| Center Bore (Hub Bore) | 220 mm |
| Offset Range (ET) | Not Applicable |
| Thread Size (Lug Nut / Bolt) | 22x1.5 |
| Fastener Seat Type | Conical 60° (Cone / Tapered) |
| Lug Wrench / Socket Hex Size | 33mm |
| Wheel Torque Specs | 450-500 ft-lbs (610-678 Nm) |
2025 MT45 Chassis — Year-Specific Fitment Context
The 2025 Freightliner MT45 Chassis is in year 2 of 3 using the 10x285.75 pattern (2024–2026). Wheels from any 2024–2026 Freightliner MT45 Chassis are cross-compatible with the 2025 model.
Freightliner MT45 Chassis Bolt Pattern by Year
Looking for all generations? View the complete Freightliner MT45 Chassis (2024–2026) Bolt Pattern & Generation Guide →
The table below shows how the MT45 Chassis's wheel specifications have changed over the years. The 2025 model year is highlighted.
2025 Freightliner MT45 Chassis Wheel Interchange & Donor Fitment Guide (10x285.75)
The 10x285.75 bolt pattern is shared by 218 vehicles in our database (moderately common). For safe wheel swaps on the 2025 Freightliner MT45 Chassis, donor rims must match the 10x285.75 PCD and have a center bore of at least 220 mm:
DIRECT HUB MATCH Same 10x285.75 Pattern & Exact 220mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2026 Freightliner MC 45 Chassis | 220 mm (Exact) | Not Applicable | 22x1.5 (Flat) |
| 2024 Freightliner MC Front Engine Motor Home Chassis | 220.1 mm (Exact) | Not Applicable | 22x1.5 (Flat) |
| 2024 Freightliner MC HEV Front Engine Motor Home Chassis | 220.1 mm (Exact) | Not Applicable | 22x1.5 (Cone) |
| 2024 Freightliner MCG Front Gasoline Engine Motor Home Chassis | 220 mm (Exact) | Not Applicable | 22x1.5 (Cone) |
| 2024 Freightliner MCL Front Engine Motor Home Chassis | 220.1 mm (Exact) | Not Applicable | 22x1.5 (Flat) |
| 2024 Freightliner MT 45 HEV Chassis | 220 mm (Exact) | Not Applicable | 22x1.5 (Flat) |
HUB RING FITMENT Same 10x285.75 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2024 Freightliner MD109 | 222 mm | 222mm → 220mm |
Not Applicable |
| 2024 Freightliner NGE (956) Platform Truck COE | 221 mm | 221mm → 220mm |
Not Applicable |
| 2024 Freightliner S2 106 Bus Chassis | 221.1 mm | 221.1mm → 220mm |
Not Applicable |
| 2024 Volvo VAH | 221 mm | 221mm → 220mm |
Not Applicable |
| 2024 Volvo VHD | 222 mm | 222mm → 220mm |
Not Applicable |
| 2024 Chevrolet 6500XD | 222 mm | 222mm → 220mm |
Not Applicable |
Quick Tips & Safety Warnings
- ⚠️ Torque lugs in a star pattern to 450-500 ft-lbs (610-678 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2025 Freightliner MT45 Chassis — Frequently Asked Questions
What is the bolt pattern for a 2025 Freightliner MT45 Chassis?
The 2025 Freightliner MT45 Chassis uses a 10x285.75 bolt pattern (also called lug pattern or PCD). The center bore is 220mm and the offset is Not Applicablemm.
What other years of Freightliner MT45 Chassis have the same bolt pattern as the 2025?
The Freightliner MT45 Chassis uses the 10x285.75 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
What is the factory wheel offset for a 2025 Freightliner MT45 Chassis?
The OEM offset for the 2025 MT45 Chassis is typically around Not Applicablemm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I use spacers on my 2025 Freightliner MT45 Chassis?
Yes, but ensure the wheel spacers match the 10x285.75 bolt pattern and 220mm center bore. Also verify that you have enough thread engagement for your 22x1.5 hardware.
What is the PCD for a 2025 Freightliner MT45 Chassis?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2025 MT45 Chassis, the PCD is 10x285.75.
How do I measure the bolt pattern on my 2025 Freightliner?
The 2025 MT45 Chassis uses a 10x285.75 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →