2026 Freightliner RA Cascadia Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Freightliner RA Cascadia is 10x285.75. It has a center bore of 220.1 mm, an offset range of Not Applicable, and utilizes 22x1.5 (Flat seat, 33mm hex) fasteners tightened to 450-500 ft-lbs (610-678 Nm).
2026 Freightliner RA Cascadia Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 10x285.75 |
|---|---|
| Center Bore (Hub Bore) | 220.1 mm |
| Offset Range (ET) | Not Applicable |
| Thread Size (Lug Nut / Bolt) | 22x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 33mm |
| Wheel Torque Specs | 450-500 ft-lbs (610-678 Nm) |
2026 RA Cascadia — Year-Specific Fitment Context
The 2026 model year is the final year of the Freightliner RA Cascadia's 10x285.75 bolt pattern run (since 2024). Wheels from any 2024–2026 Freightliner RA Cascadia are cross-compatible with the 2026 model.
Freightliner RA Cascadia Bolt Pattern by Year
Looking for all generations? View the complete Freightliner RA Cascadia (2024–2026) Bolt Pattern & Generation Guide →
The table below shows how the RA Cascadia's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 Freightliner RA Cascadia Wheel Interchange & Donor Fitment Guide (10x285.75)
The 10x285.75 bolt pattern is shared by 218 vehicles in our database (moderately common). For safe wheel swaps on the 2026 Freightliner RA Cascadia, donor rims must match the 10x285.75 PCD and have a center bore of at least 220.1 mm:
DIRECT HUB MATCH Same 10x285.75 Pattern & Exact 220.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2024 Freightliner XBR Rail Rear Engine Shuttle Bus Chassis | 220 mm (Exact) | Not Applicable | 22x1.5 (Cone) |
| 2025 Freightliner XBS Straight Rail Rear Engine Shuttle Bus Chassis | 220.1 mm (Exact) | Not Applicable | M22x1.5 (Flat) |
| 2024 Freightliner XC Chassis | 220 mm (Exact) | Not Applicable | 22x1.5 (Cone) |
| 2024 Freightliner XC Formed Rail Rear Engine Motor Home Chassis | 220.1 mm (Exact) | Not Applicable | 22x1.5 (Flat) |
| 2024 Freightliner XC Modular Rail Rear Engine Motor Home Chassis | 220 mm (Exact) | Not Applicable | 22x1.5 (Flat) |
| 2024 Freightliner XC Raised Rail (Lowered Engine) Rear Engine Motor Home Chassis | 220.1 mm (Exact) | Not Applicable | 22x1.5 (Flat) |
HUB RING FITMENT Same 10x285.75 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2024 Volvo VAH | 221 mm | 221mm → 220.1mm |
Not Applicable |
| 2024 Volvo VHD | 222 mm | 222mm → 220.1mm |
Not Applicable |
| 2024 Chevrolet 6500XD | 222 mm | 222mm → 220.1mm |
Not Applicable |
| 2024 Freightliner EF Front Engine Bus Chassis | 221.1 mm | 221.1mm → 220.1mm |
Not Applicable |
| 2024 Freightliner EFX Front Engine Bus Chassis | 222 mm | 222mm → 220.1mm |
Not Applicable |
| 2024 Freightliner MD109 | 222 mm | 222mm → 220.1mm |
Not Applicable |
Quick Tips & Safety Warnings
- ⚠️ Torque lugs in a star pattern to 450-500 ft-lbs (610-678 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Freightliner RA Cascadia — Frequently Asked Questions
What is the bolt pattern for a 2026 Freightliner RA Cascadia?
The 2026 Freightliner RA Cascadia uses a 10x285.75 bolt pattern (also called lug pattern or PCD). The center bore is 220.1mm and the offset is Not Applicablemm.
What other years of Freightliner RA Cascadia have the same bolt pattern as the 2026?
The Freightliner RA Cascadia uses the 10x285.75 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
What is the factory wheel offset for a 2026 Freightliner RA Cascadia?
The OEM offset for the 2026 RA Cascadia is typically around Not Applicablemm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What lug nut size does the 2026 Freightliner RA Cascadia use?
The 2026 Freightliner RA Cascadia uses 22x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
How tight should I torque the lug nuts on a 2026 Freightliner RA Cascadia?
Refer to your owner's manual for exact specs, but always tighten the 22x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Do 2026 Freightliner RA Cascadias use lug bolts or lug nuts?
The 2026 RA Cascadia requires 22x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →