2019 Freightliner Sprinter 3500 XD Crew Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2019 Freightliner Sprinter 3500 XD Crew, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x205 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 161 mm |
| Offset (ET) | 100 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2019 Sprinter 3500 XD Crew — Year-Specific Fitment Context
The 2019 model year marks the beginning of the Freightliner Sprinter 3500 XD Crew's 6x205 bolt pattern era, which continued through 2021 (3 consecutive years). Wheels from any 2019–2021 Freightliner Sprinter 3500 XD Crew are cross-compatible with the 2019 model.
Freightliner Sprinter 3500 XD Crew Bolt Pattern by Year
The table below shows how the Sprinter 3500 XD Crew's wheel specifications have changed over the years. The 2019 model year is highlighted.
6x205 Pattern Context
This bolt pattern appears on 26 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 6x205:
Expert Buying Guide for 2019 Freightliner Sprinter 3500 XD Crew
For the 2019 Freightliner Sprinter 3500 XD Crew, the 6x205 bolt pattern and 161mm center bore are critical. Aftermarket wheels must have a center bore of at least 161mm; use hub-centric rings to prevent vibration and ensure load distribution. Offset is sensitive—stick to the factory 100mm offset to avoid suspension or brake clearance issues. Always use 14x1.5 lug nuts with the correct seat type (cone or ball) to prevent loosening or damage. Mismatched seats can cause wheel separation. Verify wheel load rating meets or exceeds the vehicle's GVWR. Safety first: improper fitment compromises handling and braking.
Historical Fitment Data Reference
In our dataset, Freightliner Sprinter 3500 XD Crew appears from 2019 to 2021 (3 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to account for settling.
- ✅ Avoid wheels with a center bore smaller than 161mm; hub-centric rings are mandatory for larger bores.
- ✅ Check wheel offset carefully—deviations beyond ±10mm may cause rubbing on suspension or body panels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2019 Freightliner Sprinter 3500 XD Crew — Frequently Asked Questions
What is the bolt pattern for a 2019 Freightliner Sprinter 3500 XD Crew?
The 2019 Freightliner Sprinter 3500 XD Crew uses a 6x205 bolt pattern (also called lug pattern or PCD). The center bore is 161mm and the offset is 100mm.
What other years of Freightliner Sprinter 3500 XD Crew have the same bolt pattern as the 2019?
The Freightliner Sprinter 3500 XD Crew uses the 6x205 pattern from 2019 through 2021. Wheels from any of these model years are dimensionally compatible with the 2019, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2019 Freightliner Sprinter 3500 XD Crew?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What lug nut size does the 2019 Freightliner Sprinter 3500 XD Crew use?
The 2019 Freightliner Sprinter 3500 XD Crew uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
How do I measure the bolt pattern on my 2019 Freightliner?
The 2019 Sprinter 3500 XD Crew uses a 6x205 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What does 100mm offset mean for the 2019 Sprinter 3500 XD Crew?
An offset of 100mm means the wheel's mounting surface is 100mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Freightliner.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset