2025 Isuzu NRR Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2025 Isuzu NRR, along with offset and center bore data.
2025 Isuzu NRR Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 6x222.25 |
|---|---|
| Lug Nut / Bolt Size | 22x1.5 |
| Center Bore (CB) | 164 mm |
| Offset (ET) | Not Applicable |
| Torque Specs | 450-500 ft-lbs (610-678 Nm) |
2025 NRR — Year-Specific Fitment Context
The 2025 is the only model year of the Isuzu NRR in our database using the 6x222.25 bolt pattern. Note: the 2024 model used a different pattern (6x205), so its wheels are NOT interchangeable with the 2025. Across its full production run (2024–2025), the NRR has also used: 6x205.
Isuzu NRR Bolt Pattern by Year
The table below shows how the NRR's wheel specifications have changed over the years. The 2025 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2024 | 6x205 | 161 | Not Applicable |
| ▸ 2025 | 6x222.25 | 164 | Not Applicable |
6x222.25 Pattern Context
This bolt pattern appears on 2 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 6x222.25:
Quick Tips & Safety Warnings
- ⚠️ Torque lugs in a star pattern to 450-500 ft-lbs (610-678 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
2025 Isuzu NRR — Frequently Asked Questions
What is the bolt pattern for a 2025 Isuzu NRR?
The 2025 Isuzu NRR uses a 6x222.25 bolt pattern (also called lug pattern or PCD). The center bore is 164mm and the offset is Not Applicablemm.
Can I use 2024 Isuzu NRR wheels on a 2025?
No. The 2024 NRR used a 6x205 bolt pattern, which differs from the 2025's 6x222.25. They are not interchangeable.
How do I measure the bolt pattern on my 2025 Isuzu?
The 2025 NRR uses a 6x222.25 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the center bore of a 2025 Isuzu NRR?
The factory center bore (hub bore) for the 2025 Isuzu NRR is 164mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the factory wheel offset for a 2025 Isuzu NRR?
The OEM offset for the 2025 NRR is typically around Not Applicablemm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How tight should I torque the lug nuts on a 2025 Isuzu NRR?
Refer to your owner's manual for exact specs, but always tighten the 22x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset