2024 Isuzu NRR Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2024 Isuzu NRR is 6x205. It has a center bore of 161 mm, an offset range of Not Applicable, and utilizes 14x1.5 (Flat seat, 22mm hex) fasteners tightened to 300-330 ft-lbs (407-447 Nm).
2024 Isuzu NRR Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 6x205 |
|---|---|
| Center Bore (Hub Bore) | 161 mm |
| Offset Range (ET) | Not Applicable |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 22mm |
| Wheel Torque Specs | 300-330 ft-lbs (407-447 Nm) |
2024 NRR — Year-Specific Fitment Context
The 2024 model year marks the beginning of the Isuzu NRR's 6x205 bolt pattern era, which continued through 2026 (3 consecutive years). Wheels from any 2024–2026 Isuzu NRR are cross-compatible with the 2024 model.
Isuzu NRR Bolt Pattern by Year
Looking for all generations? View the complete Isuzu NRR (2024–2026) Bolt Pattern & Generation Guide →
The table below shows how the NRR's wheel specifications have changed over the years. The 2024 model year is highlighted.
2024 Isuzu NRR Wheel Interchange & Donor Fitment Guide (6x205)
The 6x205 bolt pattern is shared by 30 vehicles in our database (uncommon). For safe wheel swaps on the 2024 Isuzu NRR, donor rims must match the 6x205 PCD and have a center bore of at least 161 mm:
DIRECT HUB MATCH Same 6x205 Pattern & Exact 161mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2021 Freightliner Sprinter 4500 Crew | 161 mm (Exact) | 100-120mm | M14x1.5 (Cone) |
| 2024 Chevrolet 5500XD | 161 mm (Exact) | Not Applicable | 22x1.5 (Flat) |
| 2021 Freightliner Sprinter 3500 Cargo | 161 mm (Exact) | 100 | 14x1.5 (Cone) |
| 2021 Freightliner Sprinter 3500 Crew | 161 mm (Exact) | 100 | 14x1.5 (Cone) |
| 2021 Freightliner Sprinter 3500 XD Crew | 161 mm (Exact) | 100 | 14x1.5 (Cone) |
| 2021 Freightliner Sprinter 3500XD Cargo | 161 mm (Exact) | 100 | 14x1.5 (Cone) |
Quick Tips & Safety Warnings
- ⚠️ Torque lugs in a star pattern to 300-330 ft-lbs (407-447 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2024 Isuzu NRR — Frequently Asked Questions
What is the bolt pattern for a 2024 Isuzu NRR?
The 2024 Isuzu NRR uses a 6x205 bolt pattern (also called lug pattern or PCD). The center bore is 161mm and the offset is Not Applicablemm.
What other years of Isuzu NRR have the same bolt pattern as the 2024?
The Isuzu NRR uses the 6x205 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2024, provided the offset and center bore also match.
Do 2024 Isuzu NRRs use lug bolts or lug nuts?
The 2024 NRR requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Will wheels from another Isuzu fit my 2024 NRR?
Only if they share the exact same 6x205 bolt pattern, a compatible offset, and a center bore equal to or larger than 161mm.
How tight should I torque the lug nuts on a 2024 Isuzu NRR?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Can I use spacers on my 2024 Isuzu NRR?
Yes, but ensure the wheel spacers match the 6x205 bolt pattern and 161mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →