2019 Freightliner Sprinter 4500 Cargo Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2019 Freightliner Sprinter 4500 Cargo, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x205 |
|---|---|
| Lug Nut / Bolt Size | M14x1.5 |
| Center Bore (CB) | 161 mm |
| Offset (ET) | 100-120mm |
| Torque Specs | 100 ft-lbs (135 Nm) |
2019 Sprinter 4500 Cargo — Year-Specific Fitment Context
The 2019 model year marks the beginning of the Freightliner Sprinter 4500 Cargo's 6x205 bolt pattern era, which continued through 2021 (3 consecutive years). Wheels from any 2019–2021 Freightliner Sprinter 4500 Cargo are cross-compatible with the 2019 model.
Freightliner Sprinter 4500 Cargo Bolt Pattern by Year
The table below shows how the Sprinter 4500 Cargo's wheel specifications have changed over the years. The 2019 model year is highlighted.
6x205 Pattern Context
This bolt pattern appears on 26 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 6x205:
Expert Buying Guide for 2019 Freightliner Sprinter 4500 Cargo
For your 2019 Freightliner Sprinter 4500 Cargo, the 6x205 bolt pattern and 161mm center bore are critical. Aftermarket wheels must have a 161mm bore or use hub-centric rings to prevent vibration and ensure load support. The offset range is 100-120mm; staying within this range maintains proper suspension geometry and tire clearance. Always use M14x1.5 lug nuts with the correct seat type (typically cone seat for aftermarket wheels). Mixing thread pitches or seat types can cause wheel loosening. Verify lug nut torque specifications and re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Freightliner Sprinter 4500 Cargo appears from 2019 to 2021 (3 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 220.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 177 ft-lbs after 50-100 miles of driving.
- ✅ Ensure aftermarket wheels have a minimum load rating equal to the vehicle's GVWR.
- ✅ Avoid spacers unless hub-centric and properly torqued; they can alter offset and stress bearings.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2019 Freightliner Sprinter 4500 Cargo — Frequently Asked Questions
What is the bolt pattern for a 2019 Freightliner Sprinter 4500 Cargo?
The 2019 Freightliner Sprinter 4500 Cargo uses a 6x205 bolt pattern (also called lug pattern or PCD). The center bore is 161mm and the offset is 100-120mmmm.
What other years of Freightliner Sprinter 4500 Cargo have the same bolt pattern as the 2019?
The Freightliner Sprinter 4500 Cargo uses the 6x205 pattern from 2019 through 2021. Wheels from any of these model years are dimensionally compatible with the 2019, provided the offset and center bore also match.
Will wheels from another Freightliner fit my 2019 Sprinter 4500 Cargo?
Only if they share the exact same 6x205 bolt pattern, a compatible offset, and a center bore equal to or larger than 161mm.
How do I measure the bolt pattern on my 2019 Freightliner?
The 2019 Sprinter 4500 Cargo uses a 6x205 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the factory wheel offset for a 2019 Freightliner Sprinter 4500 Cargo?
The OEM offset for the 2019 Sprinter 4500 Cargo is typically around 100-120mmmm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Do 2019 Freightliner Sprinter 4500 Cargos use lug bolts or lug nuts?
The 2019 Sprinter 4500 Cargo requires M14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset