2019 Freightliner Sprinter 4500 Crew Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2019 Freightliner Sprinter 4500 Crew, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x205 |
|---|---|
| Lug Nut / Bolt Size | M14x1.5 |
| Center Bore (CB) | 161 mm |
| Offset (ET) | 100-120mm |
| Torque Specs | 100 ft-lbs (135 Nm) |
2019 Sprinter 4500 Crew — Year-Specific Fitment Context
The 2019 model year marks the beginning of the Freightliner Sprinter 4500 Crew's 6x205 bolt pattern era, which continued through 2021 (3 consecutive years). Wheels from any 2019–2021 Freightliner Sprinter 4500 Crew are cross-compatible with the 2019 model.
Freightliner Sprinter 4500 Crew Bolt Pattern by Year
The table below shows how the Sprinter 4500 Crew's wheel specifications have changed over the years. The 2019 model year is highlighted.
6x205 Pattern Context
This bolt pattern appears on 26 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 6x205:
Expert Buying Guide for 2019 Freightliner Sprinter 4500 Crew
For your 2019 Freightliner Sprinter 4500 Crew, the 6x205 bolt pattern and 161mm center bore are critical. Aftermarket wheels must have a center bore of at least 161mm; use hub-centric rings to avoid vibrations. The offset range is 100-120mm; staying within this ensures proper clearance and load distribution. Always use M14x1.5 lug nuts with the correct seat (cone or ball) to prevent loosening. Never mix seat types. Torque to manufacturer specs (typically 140-160 lb-ft) and re-torque after 50 miles. Incorrect fitment can lead to wheel separation.
Historical Fitment Data Reference
In our dataset, Freightliner Sprinter 4500 Crew appears from 2019 to 2021 (3 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 220.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50 miles of driving to maintain clamping force.
- ✅ Verify aftermarket wheels have a minimum center bore of 161mm; use hub-centric rings if larger.
- ✅ Check offset carefully: too low (under 100mm) may cause rubbing on suspension; too high (over 120mm) may stress wheel bearings.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2019 Freightliner Sprinter 4500 Crew — Frequently Asked Questions
What is the bolt pattern for a 2019 Freightliner Sprinter 4500 Crew?
The 2019 Freightliner Sprinter 4500 Crew uses a 6x205 bolt pattern (also called lug pattern or PCD). The center bore is 161mm and the offset is 100-120mmmm.
What other years of Freightliner Sprinter 4500 Crew have the same bolt pattern as the 2019?
The Freightliner Sprinter 4500 Crew uses the 6x205 pattern from 2019 through 2021. Wheels from any of these model years are dimensionally compatible with the 2019, provided the offset and center bore also match.
Why is matching the 161mm center bore important for the 2019 Sprinter 4500 Crew?
The 161mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the PCD for a 2019 Freightliner Sprinter 4500 Crew?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2019 Sprinter 4500 Crew, the PCD is 6x205.
What does 100-120mmmm offset mean for the 2019 Sprinter 4500 Crew?
An offset of 100-120mmmm means the wheel's mounting surface is 100-120mmmm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Freightliner.
What is the center bore of a 2019 Freightliner Sprinter 4500 Crew?
The factory center bore (hub bore) for the 2019 Freightliner Sprinter 4500 Crew is 161mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset