2026 Genesis G70 Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Genesis G70 is 5x114.3 (5x4.5"). It has a center bore of 67.1 mm, an offset range of 34-44, and utilizes 12x1.5 (Ball seat, 21mm hex) fasteners tightened to 79 ft-lbs (107 Nm).
2026 Genesis G70 Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 67.1 mm |
| Offset Range (ET) | 34-44 |
| Thread Size (Lug Nut / Bolt) | 12x1.5 |
| Fastener Seat Type | Radius / Spherical (Ball Seat) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 79 ft-lbs (107 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2026 G70 — Year-Specific Fitment Context
The 2026 model year is the final year of the Genesis G70's 5x114.3 bolt pattern run (since 2019). Wheels from any 2019–2026 Genesis G70 are cross-compatible with the 2026 model.
Genesis G70 Bolt Pattern by Year
Looking for all generations? View the complete Genesis G70 (2019–2026) Bolt Pattern & Generation Guide →
The table below shows how the G70's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 Genesis G70 Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2026 Genesis G70, donor rims must match the 5x114.3 PCD and have a center bore of at least 67.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 67.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 1994 Ford Probe | 67.1 mm (Exact) | 40 | N 12x1.50 (Cone) |
| 2025 Genesis Electrified G80 | 67.1 mm (Exact) | 35-50 | 12x1.5 (Ball) |
| 2024 Genesis Electrified GV70 | 67.1 mm (Exact) | 35-50 | 12x1.5 (Cone) |
| 2025 Genesis G80 | 67.1 mm (Exact) | 35-50 | 12x1.5 (Ball) |
| 2025 Genesis G90 | 67.1 mm (Exact) | 35-45 | 12x1.5 (Ball) |
| 2025 Genesis Genesis | 67.1 mm (Exact) | 35-45 | 12x1.5 (Ball) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 1994 Ford Ranger Regular Cab | 70.3 mm | 70.3mm → 67.1mm |
12-20 |
| 1996 Ford Ranger SuperCab | 70.3 mm | 70.3mm → 67.1mm |
12-20 |
| 1997 Jeep Wrangler | 71.6 mm | 71.6mm → 67.1mm |
25 |
| 2024 Lincoln Aviator | 70.5 mm | 70.5mm → 67.1mm |
50 |
| 1994 Lincoln Continental | 70.3 mm | 70.3mm → 67.1mm |
40 |
| 1993 Lincoln Town Car | 70.3 mm | 70.3mm → 67.1mm |
10 |
Quick Tips & Safety Warnings
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 79 ft-lbs (107 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Genesis G70 — Frequently Asked Questions
What is the bolt pattern for a 2026 Genesis G70?
The 2026 Genesis G70 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 34-44mm.
What other years of Genesis G70 have the same bolt pattern as the 2026?
The Genesis G70 uses the 5x114.3 pattern from 2019 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2026 Genesis?
The 2026 G70 uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What lug nut size does the 2026 Genesis G70 use?
The 2026 Genesis G70 uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What does 34-44mm offset mean for the 2026 G70?
An offset of 34-44mm means the wheel's mounting surface is 34-44mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Genesis.
What is the factory wheel offset for a 2026 Genesis G70?
The OEM offset for the 2026 G70 is typically around 34-44mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →