2024 Genesis G70 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2024 Genesis G70, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 35-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2024 G70 — Year-Specific Fitment Context
The 2024 model year is the final year of the Genesis G70's 5x114.3 bolt pattern run (since 2019). Wheels from any 2019–2024 Genesis G70 are cross-compatible with the 2024 model.
Genesis G70 Bolt Pattern by Year
The table below shows how the G70's wheel specifications have changed over the years. The 2024 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2024 Genesis G70
For the 2024 Genesis G70, the correct bolt pattern is 5x114.3, but the critical dimension is the center bore of 67.1mm. Aftermarket wheels often have a larger bore, so hub-centric rings are mandatory to prevent vibration and ensure proper load transfer. Offset must stay within 35-50mm; deviating can cause rubbing or clearance issues with brakes and suspension. Always use lug nuts with the correct thread pitch (12x1.5) and seat type—either cone or ball seat—matching the wheel's design. Never use incorrect lug nuts; they can loosen or damage the wheel. This is the final year for this bolt pattern, so verify compatibility with 2019–2024 G70 wheels.
Historical Fitment Data Reference
In our dataset, Genesis G70 appears from 2019 to 2024 (6 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 85.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause steering wheel vibration.
- ✅ Check brake caliper clearance when using wheels with offset near 35mm, as some aftermarket calipers may interfere.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2024 Genesis G70 — Frequently Asked Questions
What is the bolt pattern for a 2024 Genesis G70?
The 2024 Genesis G70 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-50mm.
What other years of Genesis G70 have the same bolt pattern as the 2024?
The Genesis G70 uses the 5x114.3 pattern from 2019 through 2024. Wheels from any of these model years are dimensionally compatible with the 2024, provided the offset and center bore also match.
Will wheels from another Genesis fit my 2024 G70?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
What is the factory wheel offset for a 2024 Genesis G70?
The OEM offset for the 2024 G70 is typically around 35-50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the PCD for a 2024 Genesis G70?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2024 G70, the PCD is 5x114.3.
What does 35-50mm offset mean for the 2024 G70?
An offset of 35-50mm means the wheel's mounting surface is 35-50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Genesis.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset