1995 Geo Tracker Bolt Pattern

Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1995 Geo Tracker, along with offset and center bore data.

Bolt Pattern (Lug Pattern) 5x139.7 (5x5.5")
Lug Nut / Bolt Size 12x1.25
Center Bore (CB) 108.4 mm
Offset (ET) 10
Torque Specs 80 ft-lbs (108 Nm)
💡

Imperial Match: 5x139.7 is commonly referred to as 5x5.5" in US Standard.

1995 Tracker — Year-Specific Fitment Context

The 1995 Geo Tracker is in year 4 of 6 using the 5x139.7 pattern (1992–1997). Wheels from any 1992–1997 Geo Tracker are cross-compatible with the 1995 model.

Geo Tracker Bolt Pattern by Year

The table below shows how the Tracker's wheel specifications have changed over the years. The 1995 model year is highlighted.

Year Bolt Pattern Center Bore Offset
1992 5x139.7 108.4 10
1993 5x139.7 108.4 10
1994 5x139.7 108.4 10
▸ 1995 5x139.7 108.4 10
1996 5x139.7 108.4 10
1997 5x139.7 108.4 10

5x139.7 Pattern Context

This bolt pattern appears on 261 vehicles in our current database and is considered moderately common.

Examples of other vehicles using 5x139.7:

Expert Buying Guide for 1995 Geo Tracker

For your 1995 Geo Tracker, the 5x139.7 bolt pattern is shared with 1992–1997 models, but the center bore is critical: 108.4mm. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset is sensitive; the factory 10mm offset maintains suspension geometry and tire clearance. Deviating more than 10mm can cause rubbing or bearing stress. Always use lug nuts with the correct 12x1.25 thread pitch and matching seat type (cone or ball) to avoid wheel loosening. Safety first: verify all specs before installation.

Historical Fitment Data Reference

In our dataset, Geo Tracker appears from 1992 to 1997 (6 model years). Across recorded model years, this model generally keeps the same bolt pattern.

  • Observed bolt-pattern variants for this model: 1
  • Observed center-bore variants for this model: 1
  • Observed lug-size variants for this model: 1
  • Observed total offset span across years: 0.0 mm

Quick Tips & Safety Warnings

Ready to upgrade or perform maintenance?

🛒 Shop Tools & Accessories on Amazon

As an Amazon Associate, I earn from qualifying purchases.

1995 Geo Tracker — Frequently Asked Questions

What is the bolt pattern for a 1995 Geo Tracker?

The 1995 Geo Tracker uses a 5x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 108.4mm and the offset is 10mm.

What other years of Geo Tracker have the same bolt pattern as the 1995?

The Geo Tracker uses the 5x139.7 pattern from 1992 through 1997. Wheels from any of these model years are dimensionally compatible with the 1995, provided the offset and center bore also match.

What is the PCD for a 1995 Geo Tracker?

PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 1995 Tracker, the PCD is 5x139.7.

Why is matching the 108.4mm center bore important for the 1995 Tracker?

The 108.4mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.

What is the factory wheel offset for a 1995 Geo Tracker?

The OEM offset for the 1995 Tracker is typically around 10mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.

Will wheels from another Geo fit my 1995 Tracker?

Only if they share the exact same 5x139.7 bolt pattern, a compatible offset, and a center bore equal to or larger than 108.4mm.

Need more vehicle fitment data?

Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.

Get the Full Dataset
Confidence Level
High
Verified Source
Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last Updated
2026-07-08

Geo Tracker By Year

1992 1993 1994 1995 1996 1997

Other Geo Models

Metro Prizm Storm Tracker