2026 GMC Canyon Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 GMC Canyon is 6x139.7 (6x5.5"). It has a center bore of 78.1 mm, an offset range of 33, and utilizes 14x1.5 (Flat seat, 22mm hex) fasteners tightened to 140 ft-lbs (190 Nm).
2026 GMC Canyon Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Center Bore (Hub Bore) | 78.1 mm |
| Offset Range (ET) | 33 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 22mm |
| Wheel Torque Specs | 140 ft-lbs (190 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2026 Canyon — Year-Specific Fitment Context
The 2026 model year is the final year of the GMC Canyon's 6x139.7 bolt pattern run (since 2024). Wheels from any 2024–2026 GMC Canyon are cross-compatible with the 2026 model.
GMC Canyon Bolt Pattern by Year
Looking for all generations? View the complete GMC Canyon (2024–2026) Bolt Pattern & Generation Guide →
The table below shows how the Canyon's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 GMC Canyon Wheel Interchange & Donor Fitment Guide (6x139.7)
The 6x139.7 bolt pattern is shared by 1102 vehicles in our database (common). For safe wheel swaps on the 2026 GMC Canyon, donor rims must match the 6x139.7 PCD and have a center bore of at least 78.1 mm:
DIRECT HUB MATCH Same 6x139.7 Pattern & Exact 78.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2024 Nissan Titan | 78.1 mm (Exact) | 25-35 | 14x1.5 (Flat) |
| 2025 Cadillac Escalade | 78.1 mm (Exact) | 24-31 | 14x1.5 (Flat) |
| 2025 Cadillac Escalade ESV | 78.1 mm (Exact) | 24-31 | 14x1.5 (Flat) |
| 2003 Chevrolet Astro Cargo | 78.1 mm (Exact) | 30 | 14x1.5 (Cone) |
| 2003 Chevrolet Astro Passenger | 78.1 mm (Exact) | 30 | 14x1.5 (Cone) |
| 2025 Chevrolet BrightDrop | 78.1 mm (Exact) | Not Applicable | 14x1.5 (Flat) |
HUB RING FITMENT Same 6x139.7 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2007 Kia Sedona | 92.2 mm | 92.2mm → 78.1mm |
46 |
| 2008 Lexus GX | 106.1 mm | 106.1mm → 78.1mm |
25 |
| 2022 Lexus LX | 95.1 mm | 95.1mm → 78.1mm |
60 |
| 1997 MAZDA B-Series Cab Plus | 93.1 mm | 93.1mm → 78.1mm |
25 |
| 1997 MAZDA B-Series Regular Cab | 93.1 mm | 93.1mm → 78.1mm |
25 |
| 2006 Nissan Armada | 110.1 mm | 110.1mm → 78.1mm |
24 |
Quick Tips & Safety Warnings
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 GMC Canyon — Frequently Asked Questions
What is the bolt pattern for a 2026 GMC Canyon?
The 2026 GMC Canyon uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 78.1mm and the offset is 33mm.
What other years of GMC Canyon have the same bolt pattern as the 2026?
The GMC Canyon uses the 6x139.7 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
What lug nut size does the 2026 GMC Canyon use?
The 2026 GMC Canyon uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
How do I measure the bolt pattern on my 2026 GMC?
The 2026 Canyon uses a 6x139.7 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I put aftermarket wheels on my 2026 GMC Canyon?
Absolutely. Just ensure the aftermarket wheels have a 6x139.7 bolt pattern, an offset near 33mm, and a center bore of at least 78.1mm (using hub rings if larger).
What does 33mm offset mean for the 2026 Canyon?
An offset of 33mm means the wheel's mounting surface is 33mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your GMC.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →