2004 GMC Envoy XUV Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2004 GMC Envoy XUV, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x127 |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 78.1 mm |
| Offset (ET) | 50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2004 Envoy XUV — Year-Specific Fitment Context
The 2004 model year marks the beginning of the GMC Envoy XUV's 6x127 bolt pattern era, which continued through 2005 (2 consecutive years). Wheels from any 2004–2005 GMC Envoy XUV are cross-compatible with the 2004 model.
GMC Envoy XUV Bolt Pattern by Year
The table below shows how the Envoy XUV's wheel specifications have changed over the years. The 2004 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| ▸ 2004 | 6x127 | 78.1 | 50 |
| 2005 | 6x127 | 78.1 | 50 |
6x127 Pattern Context
This bolt pattern appears on 49 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 6x127:
Expert Buying Guide for 2004 GMC Envoy XUV
For your 2004 GMC Envoy XUV, the 6x127 bolt pattern and 78.1mm center bore are critical. Aftermarket wheels often have a larger center bore (e.g., 78.3mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. The factory offset is 50mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct 12x1.5 thread pitch and a 60-degree conical seat (factory spec). Avoid ball-seat or shank-style nuts, as they can loosen or damage the wheel. Re-torque after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, GMC Envoy XUV appears from 2004 to 2005 (2 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 140 ft-lbs after 50-100 miles, then periodically check.
- ✅ When using aftermarket wheels, verify hub-centric ring inner diameter matches 78.1mm; outer diameter must match wheel's bore.
- ✅ Avoid wheels with offset below 45mm (too aggressive) or above 55mm (too tucked); test fitment for brake caliper clearance.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2004 GMC Envoy XUV — Frequently Asked Questions
What is the bolt pattern for a 2004 GMC Envoy XUV?
The 2004 GMC Envoy XUV uses a 6x127 bolt pattern (also called lug pattern or PCD). The center bore is 78.1mm and the offset is 50mm.
What other years of GMC Envoy XUV have the same bolt pattern as the 2004?
The GMC Envoy XUV uses the 6x127 pattern from 2004 through 2005. Wheels from any of these model years are dimensionally compatible with the 2004, provided the offset and center bore also match.
What is the factory wheel offset for a 2004 GMC Envoy XUV?
The OEM offset for the 2004 Envoy XUV is typically around 50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Why is matching the 78.1mm center bore important for the 2004 Envoy XUV?
The 78.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Will wheels from another GMC fit my 2004 Envoy XUV?
Only if they share the exact same 6x127 bolt pattern, a compatible offset, and a center bore equal to or larger than 78.1mm.
What is the PCD for a 2004 GMC Envoy XUV?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2004 Envoy XUV, the PCD is 6x127.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset