2010 GMC Sierra 1500 Crew Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2010 GMC Sierra 1500 Crew Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 78.1 mm |
| Offset (ET) | 20-30 |
| Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2010 Sierra 1500 Crew Cab — Year-Specific Fitment Context
The 2010 GMC Sierra 1500 Crew Cab is in year 7 of 21 using the 6x139.7 pattern (2004–2024). Wheels from any 2004–2024 GMC Sierra 1500 Crew Cab are cross-compatible with the 2010 model.
GMC Sierra 1500 Crew Cab Bolt Pattern by Year
The table below shows how the Sierra 1500 Crew Cab's wheel specifications have changed over the years. The 2010 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2004 | 6x139.7 | 78.1 | 20-30 |
| 2005 | 6x139.7 | 78.1 | 20-30 |
| 2006 | 6x139.7 | 78.1 | 20-30 |
| 2007 | 6x139.7 | 78.1 | 20-30 |
| 2008 | 6x139.7 | 78.1 | 20-30 |
| 2009 | 6x139.7 | 78.1 | 20-30 |
| ▸ 2010 | 6x139.7 | 78.1 | 20-30 |
| 2011 | 6x139.7 | 78.1 | 20-30 |
| 2012 | 6x139.7 | 78.1 | 20-30 |
| 2013 | 6x139.7 | 78.1 | 20-30 |
| 2014 | 6x139.7 | 78.1 | 20-30 |
| 2015 | 6x139.7 | 78.1 | 20-30 |
| 2016 | 6x139.7 | 78.1 | 20-30 |
| 2017 | 6x139.7 | 78.1 | 20-30 |
| 2018 | 6x139.7 | 78.1 | 20-30 |
| 2019 | 6x139.7 | 78.1 | 20-30 |
| 2020 | 6x139.7 | 78.1 | 20-30 |
| 2021 | 6x139.7 | 78.1 | 20-30 |
| 2022 | 6x139.7 | 78.1 | 20-30 |
| 2023 | 6x139.7 | 78.1 | 20-30 |
| 2024 | 6x139.7 | 78.1 | 20-30 |
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 2010 GMC Sierra 1500 Crew Cab
For your 2010 GMC Sierra 1500 Crew Cab, the 6x139.7 bolt pattern and 78.1mm center bore are critical. Aftermarket wheels must have a bore ≥78.1mm; use hub-centric rings to prevent vibration and ensure load is on the hub, not the lugs. Offset must stay within 20-30mm to avoid rubbing on suspension or fenders. Always use 14x1.5 lug nuts with the correct seat (cone or ball) matching your wheels; improper seating can cause wheel loss. Re-torque after 50-100 miles. Wheels from 2004-2024 GMC Sierra 1500 Crew Cab models are direct fit.
Historical Fitment Data Reference
In our dataset, GMC Sierra 1500 Crew Cab appears from 2004 to 2024 (21 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 50.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 140 ft-lb after 50-100 miles of driving.
- ✅ Avoid wheels with offset below 20mm to prevent inner tire rubbing on suspension components.
- ✅ Verify aftermarket wheels include hub-centric rings; without them, vibrations may occur.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2010 GMC Sierra 1500 Crew Cab — Frequently Asked Questions
What is the bolt pattern for a 2010 GMC Sierra 1500 Crew Cab?
The 2010 GMC Sierra 1500 Crew Cab uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 78.1mm and the offset is 20-30mm.
What other years of GMC Sierra 1500 Crew Cab have the same bolt pattern as the 2010?
The GMC Sierra 1500 Crew Cab uses the 6x139.7 pattern from 2004 through 2024. Wheels from any of these model years are dimensionally compatible with the 2010, provided the offset and center bore also match.
Why is matching the 78.1mm center bore important for the 2010 Sierra 1500 Crew Cab?
The 78.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
How do I measure the bolt pattern on my 2010 GMC?
The 2010 Sierra 1500 Crew Cab uses a 6x139.7 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the center bore of a 2010 GMC Sierra 1500 Crew Cab?
The factory center bore (hub bore) for the 2010 GMC Sierra 1500 Crew Cab is 78.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Will wheels from another GMC fit my 2010 Sierra 1500 Crew Cab?
Only if they share the exact same 6x139.7 bolt pattern, a compatible offset, and a center bore equal to or larger than 78.1mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset