2017 GMC Sierra 3500 HD Regular Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2017 GMC Sierra 3500 HD Regular Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 8x180 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 124.9 mm |
| Offset (ET) | 44 |
| Torque Specs | 140 ft-lbs (190 Nm) |
2017 Sierra 3500 HD Regular Cab — Year-Specific Fitment Context
The 2017 GMC Sierra 3500 HD Regular Cab is in year 7 of 14 using the 8x180 pattern (2011–2024). Wheels from any 2011–2024 GMC Sierra 3500 HD Regular Cab are cross-compatible with the 2017 model. Across its full production run (2007–2024), the Sierra 3500 HD Regular Cab has also used: 8x165.1.
GMC Sierra 3500 HD Regular Cab Bolt Pattern by Year
The table below shows how the Sierra 3500 HD Regular Cab's wheel specifications have changed over the years. The 2017 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2007 | 8x165.1 | 116.7 | 20-40 |
| 2008 | 8x165.1 | 116.7 | 20-40 |
| 2009 | 8x165.1 | 116.7 | 20-40 |
| 2010 | 8x165.1 | 116.7 | 20-40 |
| 2011 | 8x180 | 124.9 | 44 |
| 2012 | 8x180 | 124.9 | 44 |
| 2013 | 8x180 | 124.9 | 44 |
| 2014 | 8x180 | 124.9 | 44 |
| 2015 | 8x180 | 124.9 | 44 |
| 2016 | 8x180 | 124.9 | 44 |
| ▸ 2017 | 8x180 | 124.9 | 44 |
| 2018 | 8x180 | 124.9 | 44 |
| 2021 | 8x180 | 124.9 | 44 |
| 2022 | 8x180 | 124.9 | 44 |
| 2023 | 8x180 | 124.9 | 44 |
| 2024 | 8x180 | 124.9 | 44 |
8x180 Pattern Context
This bolt pattern appears on 247 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 8x180:
Expert Buying Guide for 2017 GMC Sierra 3500 HD Regular Cab
The 2017 GMC Sierra 3500 HD Regular Cab uses an 8x180 bolt pattern with a 124.9mm center bore. Aftermarket wheels must match the bore exactly or use hub-centric rings to prevent vibration and ensure proper load distribution. The factory offset is 44mm; deviations beyond ±10mm may cause rubbing or suspension interference. Always use lug nuts with the correct 14x1.5 thread pitch and a 60-degree conical seat—never ball seat—to avoid wheel loosening. Verify wheel load rating exceeds the truck's GVWR. Cross-compatible wheels from 2011–2024 Sierra 3500 HD Regular Cabs fit, but avoid 8x165.1 pattern wheels from earlier models.
Historical Fitment Data Reference
In our dataset, GMC Sierra 3500 HD Regular Cab appears from 2007 to 2024 (16 model years). Across model years, this model appears with 2 bolt patterns (8x165.1, 8x180).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 84.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 140 ft-lb after 50 miles of driving.
- ✅ Use hub-centric rings for aftermarket wheels; plastic rings are acceptable for street use.
- ✅ Check wheel backspacing: factory is 5.5 inches; aftermarket wheels with less than 5 inches may contact brake calipers.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2017 GMC Sierra 3500 HD Regular Cab — Frequently Asked Questions
What is the bolt pattern for a 2017 GMC Sierra 3500 HD Regular Cab?
The 2017 GMC Sierra 3500 HD Regular Cab uses a 8x180 bolt pattern (also called lug pattern or PCD). The center bore is 124.9mm and the offset is 44mm.
What other years of GMC Sierra 3500 HD Regular Cab have the same bolt pattern as the 2017?
The GMC Sierra 3500 HD Regular Cab uses the 8x180 pattern from 2011 through 2024. Wheels from any of these model years are dimensionally compatible with the 2017, provided the offset and center bore also match.
What is the factory wheel offset for a 2017 GMC Sierra 3500 HD Regular Cab?
The OEM offset for the 2017 Sierra 3500 HD Regular Cab is typically around 44mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the center bore of a 2017 GMC Sierra 3500 HD Regular Cab?
The factory center bore (hub bore) for the 2017 GMC Sierra 3500 HD Regular Cab is 124.9mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Can I put aftermarket wheels on my 2017 GMC Sierra 3500 HD Regular Cab?
Absolutely. Just ensure the aftermarket wheels have a 8x180 bolt pattern, an offset near 44mm, and a center bore of at least 124.9mm (using hub rings if larger).
What does 44mm offset mean for the 2017 Sierra 3500 HD Regular Cab?
An offset of 44mm means the wheel's mounting surface is 44mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your GMC.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset