2011 GMC Savana 2500 Cargo Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2011 GMC Savana 2500 Cargo, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 8x180 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 124.9 mm |
| Offset (ET) | 44 |
| Torque Specs | 140 ft-lbs (190 Nm) |
2011 Savana 2500 Cargo — Year-Specific Fitment Context
The 2011 model year marks the beginning of the GMC Savana 2500 Cargo's 8x180 bolt pattern era, which continued through 2024 (14 consecutive years). Wheels from any 2011–2024 GMC Savana 2500 Cargo are cross-compatible with the 2011 model. Note: the 2010 model used a different pattern (8x165.1), so its wheels are NOT interchangeable with the 2011. Across its full production run (1996–2024), the Savana 2500 Cargo has also used: 8x165.1.
GMC Savana 2500 Cargo Bolt Pattern by Year
The table below shows how the Savana 2500 Cargo's wheel specifications have changed over the years. The 2011 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1996 | 8x165.1 | 116.7 | 28 |
| 1997 | 8x165.1 | 116.7 | 28 |
| 1998 | 8x165.1 | 116.7 | 28 |
| 1999 | 8x165.1 | 116.7 | 28 |
| 2000 | 8x165.1 | 116.7 | 28 |
| 2001 | 8x165.1 | 116.7 | 28 |
| 2002 | 8x165.1 | 116.7 | 28 |
| 2003 | 8x165.1 | 116.7 | 28 |
| 2004 | 8x165.1 | 116.7 | 28 |
| 2005 | 8x165.1 | 116.7 | 28 |
| 2006 | 8x165.1 | 116.7 | 28 |
| 2007 | 8x165.1 | 116.7 | 28 |
| 2008 | 8x165.1 | 116.7 | 28 |
| 2009 | 8x165.1 | 116.7 | 28 |
| 2010 | 8x165.1 | 116.7 | 28 |
| ▸ 2011 | 8x180 | 124.9 | 44 |
| 2012 | 8x180 | 124.9 | 44 |
| 2013 | 8x180 | 124.9 | 44 |
| 2014 | 8x180 | 124.9 | 44 |
| 2015 | 8x180 | 124.9 | 44 |
| 2016 | 8x180 | 124.9 | 44 |
| 2017 | 8x180 | 124.9 | 44 |
| 2018 | 8x180 | 124.9 | 44 |
| 2019 | 8x180 | 124.9 | 44 |
| 2021 | 8x180 | 124.9 | 44 |
| 2022 | 8x180 | 124.9 | 44 |
| 2023 | 8x180 | 124.9 | 44 |
| 2024 | 8x180 | 124.9 | 44 |
8x180 Pattern Context
This bolt pattern appears on 247 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 8x180:
Expert Buying Guide for 2011 GMC Savana 2500 Cargo
When selecting wheels for the 2011 GMC Savana 2500 Cargo, the 8x180 bolt pattern is critical. This pattern is shared with 2011–2024 models, but not with earlier years (8x165.1). The center bore is 124.9mm; aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. Offset is sensitive: stick to 44mm ±10mm to avoid rubbing or suspension interference. Always use lug nuts with the correct thread pitch (14x1.5) and seat type (conical/60-degree). Mismatched lug nuts can cause wheel loosening or damage. Verify all specs before purchase.
Historical Fitment Data Reference
In our dataset, GMC Savana 2500 Cargo appears from 1996 to 2024 (28 model years). Across model years, this model appears with 2 bolt patterns (8x165.1, 8x180).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 16.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50–100 miles of driving to maintain clamping force.
- ✅ Avoid using wheels from 2010 or earlier models; their 8x165.1 pattern will not fit.
- ✅ If using aftermarket wheels, ensure hub-centric rings are installed to match the 124.9mm bore.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2011 GMC Savana 2500 Cargo — Frequently Asked Questions
What is the bolt pattern for a 2011 GMC Savana 2500 Cargo?
The 2011 GMC Savana 2500 Cargo uses a 8x180 bolt pattern (also called lug pattern or PCD). The center bore is 124.9mm and the offset is 44mm.
What other years of GMC Savana 2500 Cargo have the same bolt pattern as the 2011?
The GMC Savana 2500 Cargo uses the 8x180 pattern from 2011 through 2024. Wheels from any of these model years are dimensionally compatible with the 2011, provided the offset and center bore also match.
Can I use 2010 GMC Savana 2500 Cargo wheels on a 2011?
No. The 2010 Savana 2500 Cargo used a 8x165.1 bolt pattern, which differs from the 2011's 8x180. They are not interchangeable.
Do 2011 GMC Savana 2500 Cargos use lug bolts or lug nuts?
The 2011 Savana 2500 Cargo requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Will wheels from another GMC fit my 2011 Savana 2500 Cargo?
Only if they share the exact same 8x180 bolt pattern, a compatible offset, and a center bore equal to or larger than 124.9mm.
What is the PCD for a 2011 GMC Savana 2500 Cargo?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2011 Savana 2500 Cargo, the PCD is 8x180.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset