2013 GMC Savana 2500 Cargo Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2013 GMC Savana 2500 Cargo, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 8x180 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 124.9 mm |
| Offset (ET) | 44 |
| Torque Specs | 140 ft-lbs (190 Nm) |
2013 Savana 2500 Cargo — Year-Specific Fitment Context
The 2013 GMC Savana 2500 Cargo is in year 3 of 14 using the 8x180 pattern (2011–2024). Wheels from any 2011–2024 GMC Savana 2500 Cargo are cross-compatible with the 2013 model. Across its full production run (1996–2024), the Savana 2500 Cargo has also used: 8x165.1.
GMC Savana 2500 Cargo Bolt Pattern by Year
The table below shows how the Savana 2500 Cargo's wheel specifications have changed over the years. The 2013 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1996 | 8x165.1 | 116.7 | 28 |
| 1997 | 8x165.1 | 116.7 | 28 |
| 1998 | 8x165.1 | 116.7 | 28 |
| 1999 | 8x165.1 | 116.7 | 28 |
| 2000 | 8x165.1 | 116.7 | 28 |
| 2001 | 8x165.1 | 116.7 | 28 |
| 2002 | 8x165.1 | 116.7 | 28 |
| 2003 | 8x165.1 | 116.7 | 28 |
| 2004 | 8x165.1 | 116.7 | 28 |
| 2005 | 8x165.1 | 116.7 | 28 |
| 2006 | 8x165.1 | 116.7 | 28 |
| 2007 | 8x165.1 | 116.7 | 28 |
| 2008 | 8x165.1 | 116.7 | 28 |
| 2009 | 8x165.1 | 116.7 | 28 |
| 2010 | 8x165.1 | 116.7 | 28 |
| 2011 | 8x180 | 124.9 | 44 |
| 2012 | 8x180 | 124.9 | 44 |
| ▸ 2013 | 8x180 | 124.9 | 44 |
| 2014 | 8x180 | 124.9 | 44 |
| 2015 | 8x180 | 124.9 | 44 |
| 2016 | 8x180 | 124.9 | 44 |
| 2017 | 8x180 | 124.9 | 44 |
| 2018 | 8x180 | 124.9 | 44 |
| 2019 | 8x180 | 124.9 | 44 |
| 2021 | 8x180 | 124.9 | 44 |
| 2022 | 8x180 | 124.9 | 44 |
| 2023 | 8x180 | 124.9 | 44 |
| 2024 | 8x180 | 124.9 | 44 |
8x180 Pattern Context
This bolt pattern appears on 247 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 8x180:
Expert Buying Guide for 2013 GMC Savana 2500 Cargo
For your 2013 GMC Savana 2500 Cargo, the critical specs are: bolt pattern 8x180, center bore 124.9mm, offset 44mm, and lug nut size 14x1.5. The 124.9mm center bore is hub-centric; aftermarket wheels with a larger bore require hub-centric rings to prevent vibration and ensure proper load transfer. Offset is sensitive—deviating from 44mm may cause rubbing or clearance issues with brakes and suspension. Always use lug nuts with the correct thread pitch (14x1.5) and seat type (conical/60-degree) to avoid wheel loosening. Wheels from 2011–2024 Savana 2500 Cargo models are direct fit. Avoid 8x165.1 pattern wheels from earlier years.
Historical Fitment Data Reference
In our dataset, GMC Savana 2500 Cargo appears from 1996 to 2024 (28 model years). Across model years, this model appears with 2 bolt patterns (8x165.1, 8x180).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 16.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50–100 miles of driving to ensure proper seating.
- ✅ When using aftermarket wheels, verify that the wheel's hub bore matches or use hub-centric rings to avoid vibrations.
- ✅ Check offset carefully; a lower offset (e.g., 0mm) may cause the tire to protrude beyond the fender, risking rubbing and legal issues.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2013 GMC Savana 2500 Cargo — Frequently Asked Questions
What is the bolt pattern for a 2013 GMC Savana 2500 Cargo?
The 2013 GMC Savana 2500 Cargo uses a 8x180 bolt pattern (also called lug pattern or PCD). The center bore is 124.9mm and the offset is 44mm.
What other years of GMC Savana 2500 Cargo have the same bolt pattern as the 2013?
The GMC Savana 2500 Cargo uses the 8x180 pattern from 2011 through 2024. Wheels from any of these model years are dimensionally compatible with the 2013, provided the offset and center bore also match.
What is the factory wheel offset for a 2013 GMC Savana 2500 Cargo?
The OEM offset for the 2013 Savana 2500 Cargo is typically around 44mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How do I measure the bolt pattern on my 2013 GMC?
The 2013 Savana 2500 Cargo uses a 8x180 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I put aftermarket wheels on my 2013 GMC Savana 2500 Cargo?
Absolutely. Just ensure the aftermarket wheels have a 8x180 bolt pattern, an offset near 44mm, and a center bore of at least 124.9mm (using hub rings if larger).
What does 44mm offset mean for the 2013 Savana 2500 Cargo?
An offset of 44mm means the wheel's mounting surface is 44mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your GMC.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset