1993 GMC Sonoma Club Coupe Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1993 GMC Sonoma Club Coupe Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x120.65 (5x4.75") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 70.3 mm |
| Offset (ET) | 0-13 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x120.65 is commonly referred to as 5x4.75" in US Standard.
1993 Sonoma Club Coupe Cab — Year-Specific Fitment Context
The 1993 model year marks the beginning of the GMC Sonoma Club Coupe Cab's 5x120.65 bolt pattern era, which continued through 1998 (6 consecutive years). Wheels from any 1993–1998 GMC Sonoma Club Coupe Cab are cross-compatible with the 1993 model.
GMC Sonoma Club Coupe Cab Bolt Pattern by Year
The table below shows how the Sonoma Club Coupe Cab's wheel specifications have changed over the years. The 1993 model year is highlighted.
5x120.65 Pattern Context
This bolt pattern appears on 202 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x120.65:
Expert Buying Guide for 1993 GMC Sonoma Club Coupe Cab
For your 1993 GMC Sonoma Club Coupe Cab, the bolt pattern is 5x120.65mm with a center bore of 70.3mm. When selecting aftermarket wheels, ensure they have a center bore larger than 70.3mm and use hub-centric rings to prevent vibration and ensure proper load distribution. The offset range is 0-13mm; staying within this range maintains suspension geometry and prevents rubbing. Always use lug nuts with the correct thread pitch (12x1.5) and seat type (cone or ball seat) to avoid wheel loosening. Mismatched lug nuts can cause wheel separation. Verify that aftermarket wheels are hub-centric or use rings, and never exceed the offset range.
Historical Fitment Data Reference
In our dataset, GMC Sonoma Club Coupe Cab appears from 1993 to 1998 (6 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 13.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using wheels with a center bore smaller than 70.3mm; they will not fit without machining.
- ✅ Check that aftermarket wheels have a conical or ball seat lug nut seat; flat seat lug nuts are unsafe for this vehicle.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1993 GMC Sonoma Club Coupe Cab — Frequently Asked Questions
What is the bolt pattern for a 1993 GMC Sonoma Club Coupe Cab?
The 1993 GMC Sonoma Club Coupe Cab uses a 5x120.65 bolt pattern (also called lug pattern or PCD). The center bore is 70.3mm and the offset is 0-13mm.
What other years of GMC Sonoma Club Coupe Cab have the same bolt pattern as the 1993?
The GMC Sonoma Club Coupe Cab uses the 5x120.65 pattern from 1993 through 1998. Wheels from any of these model years are dimensionally compatible with the 1993, provided the offset and center bore also match.
How do I measure the bolt pattern on my 1993 GMC?
The 1993 Sonoma Club Coupe Cab uses a 5x120.65 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Do 1993 GMC Sonoma Club Coupe Cabs use lug bolts or lug nuts?
The 1993 Sonoma Club Coupe Cab requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Can I use spacers on my 1993 GMC Sonoma Club Coupe Cab?
Yes, but ensure the wheel spacers match the 5x120.65 bolt pattern and 70.3mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
What is the factory wheel offset for a 1993 GMC Sonoma Club Coupe Cab?
The OEM offset for the 1993 Sonoma Club Coupe Cab is typically around 0-13mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset