2016 GMC Yukon Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2016 GMC Yukon, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 78.1 mm |
| Offset (ET) | 20-30 |
| Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2016 Yukon — Year-Specific Fitment Context
The 2016 GMC Yukon is in year 25 of 34 using the 6x139.7 pattern (1992–2025). Wheels from any 1992–2025 GMC Yukon are cross-compatible with the 2016 model.
GMC Yukon Bolt Pattern by Year
The table below shows how the Yukon's wheel specifications have changed over the years. The 2016 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 6x139.7 | 78.1 | 20-30 |
| 1993 | 6x139.7 | 78.1 | 20-30 |
| 1994 | 6x139.7 | 78.1 | 20-30 |
| 1995 | 6x139.7 | 78.1 | 20-30 |
| 1996 | 6x139.7 | 78.1 | 20-30 |
| 1997 | 6x139.7 | 78.1 | 20-30 |
| 1998 | 6x139.7 | 78.1 | 20-30 |
| 1999 | 6x139.7 | 78.1 | 20-30 |
| 2000 | 6x139.7 | 78.1 | 20-30 |
| 2001 | 6x139.7 | 78.1 | 20-30 |
| 2002 | 6x139.7 | 78.1 | 20-30 |
| 2003 | 6x139.7 | 78.1 | 20-30 |
| 2004 | 6x139.7 | 78.1 | 20-30 |
| 2005 | 6x139.7 | 78.1 | 20-30 |
| 2006 | 6x139.7 | 78.1 | 20-30 |
| 2007 | 6x139.7 | 78.1 | 20-30 |
| 2008 | 6x139.7 | 78.1 | 20-30 |
| 2009 | 6x139.7 | 78.1 | 20-30 |
| 2010 | 6x139.7 | 78.1 | 20-30 |
| 2011 | 6x139.7 | 78.1 | 20-30 |
| 2012 | 6x139.7 | 78.1 | 20-30 |
| 2013 | 6x139.7 | 78.1 | 20-30 |
| 2014 | 6x139.7 | 78.1 | 20-30 |
| 2015 | 6x139.7 | 78.1 | 20-30 |
| ▸ 2016 | 6x139.7 | 78.1 | 20-30 |
| 2017 | 6x139.7 | 78.1 | 20-30 |
| 2018 | 6x139.7 | 78.1 | 20-30 |
| 2019 | 6x139.7 | 78.1 | 20-30 |
| 2020 | 6x139.7 | 78.1 | 20-30 |
| 2021 | 6x139.7 | 78.1 | 20-30 |
| 2022 | 6x139.7 | 78.1 | 20-30 |
| 2023 | 6x139.7 | 78.1 | 20-30 |
| 2024 | 6x139.7 | 78.1 | 20-30 |
| 2025 | 6x139.7 | 78.1 | 20-30 |
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 2016 GMC Yukon
For your 2016 GMC Yukon, the 6x139.7 bolt pattern and 78.1mm center bore are critical. Aftermarket wheels often have a larger bore; use hub-centric rings to prevent vibration and ensure load is on the hub, not the lugs. Offset must stay within 20-30mm to avoid rubbing suspension or fenders. Always use 14x1.5 lug nuts with the correct seat (factory is cone seat). Never mix seat types—using ball-seat nuts on cone-seat wheels can cause loosening. Re-torque after 50-100 miles. Avoid spacers unless hub-centric and properly torqued.
Historical Fitment Data Reference
In our dataset, GMC Yukon appears from 1992 to 2025 (34 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 50.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 140 ft-lbs after 50-100 miles of driving.
- ✅ If using aftermarket wheels, verify hub bore is at least 78.1mm and use hub-centric rings.
- ✅ Check offset carefully: 20-30mm is safe; lower offset may rub on fender or suspension.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2016 GMC Yukon — Frequently Asked Questions
What is the bolt pattern for a 2016 GMC Yukon?
The 2016 GMC Yukon uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 78.1mm and the offset is 20-30mm.
What other years of GMC Yukon have the same bolt pattern as the 2016?
The GMC Yukon uses the 6x139.7 pattern from 1992 through 2025. Wheels from any of these model years are dimensionally compatible with the 2016, provided the offset and center bore also match.
What is the PCD for a 2016 GMC Yukon?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2016 Yukon, the PCD is 6x139.7.
What is the center bore of a 2016 GMC Yukon?
The factory center bore (hub bore) for the 2016 GMC Yukon is 78.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Can I put aftermarket wheels on my 2016 GMC Yukon?
Absolutely. Just ensure the aftermarket wheels have a 6x139.7 bolt pattern, an offset near 20-30mm, and a center bore of at least 78.1mm (using hub rings if larger).
Why is matching the 78.1mm center bore important for the 2016 Yukon?
The 78.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset