2024 GMC Canyon Crew Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2024 GMC Canyon Crew Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 78.1 mm |
| Offset (ET) | 30 |
| Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2024 Canyon Crew Cab — Year-Specific Fitment Context
The 2024 model year is the final year of the GMC Canyon Crew Cab's 6x139.7 bolt pattern run (since 2004). Wheels from any 2004–2024 GMC Canyon Crew Cab are cross-compatible with the 2024 model. Across its full production run (2004–2024), the Canyon Crew Cab has also used: 6x120.
GMC Canyon Crew Cab Bolt Pattern by Year
The table below shows how the Canyon Crew Cab's wheel specifications have changed over the years. The 2024 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2004 | 6x139.7 | 100.3 | 33 |
| 2005 | 6x139.7 | 100.3 | 33 |
| 2006 | 6x139.7 | 100.3 | 33 |
| 2007 | 6x139.7 | 100.3 | 33 |
| 2008 | 6x139.7 | 100.3 | 33 |
| 2009 | 6x139.7 | 100.3 | 33 |
| 2010 | 6x139.7 | 100.3 | 33 |
| 2011 | 6x139.7 | 100.3 | 33 |
| 2012 | 6x139.7 | 100.3 | 33 |
| 2015 | 6x120 | 66.9 | 33 |
| 2016 | 6x120 | 66.9 | 33 |
| 2017 | 6x120 | 66.9 | 33 |
| 2018 | 6x120 | 66.9 | 33 |
| 2019 | 6x120 | 66.9 | 33 |
| 2020 | 6x120 | 66.9 | 33 |
| 2021 | 6x120 | 66.9 | 33 |
| 2022 | 6x120 | 66.9 | 33 |
| 2023 | 6x139.7 | 78.1 | 30 |
| ▸ 2024 | 6x139.7 | 78.1 | 30 |
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 2024 GMC Canyon Crew Cab
For your 2024 GMC Canyon Crew Cab, the 6x139.7 bolt pattern and 78.1mm center bore are critical. Aftermarket wheels often have a larger bore (e.g., 78.1mm or 106.1mm); use hub-centric rings to prevent vibration and ensure proper load transfer. Offset is sensitive: the factory range is 30mm ±10mm. Exceeding this can cause rubbing or suspension interference. Always use the correct lug nuts: 14x1.5 thread pitch with a cone seat (60-degree taper). Ball-seat or flat-seat nuts are unsafe. Re-torque after 50 miles of driving. Avoid wheels from 2004-2024 models with 6x120 bolt pattern—they are not compatible.
Historical Fitment Data Reference
In our dataset, GMC Canyon Crew Cab appears from 2004 to 2024 (19 model years). Across model years, this model appears with 2 bolt patterns (6x120, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 3
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 3.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 140 ft-lbs after 50 miles of driving.
- ✅ Verify wheel bore is ≥78.1mm; use hub-centric rings if larger.
- ✅ Check offset: +20mm to +40mm is safe; +30mm is ideal.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2024 GMC Canyon Crew Cab — Frequently Asked Questions
What is the bolt pattern for a 2024 GMC Canyon Crew Cab?
The 2024 GMC Canyon Crew Cab uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 78.1mm and the offset is 30mm.
What other years of GMC Canyon Crew Cab have the same bolt pattern as the 2024?
The GMC Canyon Crew Cab uses the 6x139.7 pattern from 2004 through 2024. Wheels from any of these model years are dimensionally compatible with the 2024, provided the offset and center bore also match.
Why is matching the 78.1mm center bore important for the 2024 Canyon Crew Cab?
The 78.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the PCD for a 2024 GMC Canyon Crew Cab?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2024 Canyon Crew Cab, the PCD is 6x139.7.
What does 30mm offset mean for the 2024 Canyon Crew Cab?
An offset of 30mm means the wheel's mounting surface is 30mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your GMC.
How do I measure the bolt pattern on my 2024 GMC?
The 2024 Canyon Crew Cab uses a 6x139.7 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset