2007 GMC Canyon Crew Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2007 GMC Canyon Crew Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 100.3 mm |
| Offset (ET) | 33 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2007 Canyon Crew Cab — Year-Specific Fitment Context
The 2007 GMC Canyon Crew Cab is in year 4 of 21 using the 6x139.7 pattern (2004–2024). Wheels from any 2004–2024 GMC Canyon Crew Cab are cross-compatible with the 2007 model. Across its full production run (2004–2024), the Canyon Crew Cab has also used: 6x120.
GMC Canyon Crew Cab Bolt Pattern by Year
The table below shows how the Canyon Crew Cab's wheel specifications have changed over the years. The 2007 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2004 | 6x139.7 | 100.3 | 33 |
| 2005 | 6x139.7 | 100.3 | 33 |
| 2006 | 6x139.7 | 100.3 | 33 |
| ▸ 2007 | 6x139.7 | 100.3 | 33 |
| 2008 | 6x139.7 | 100.3 | 33 |
| 2009 | 6x139.7 | 100.3 | 33 |
| 2010 | 6x139.7 | 100.3 | 33 |
| 2011 | 6x139.7 | 100.3 | 33 |
| 2012 | 6x139.7 | 100.3 | 33 |
| 2015 | 6x120 | 66.9 | 33 |
| 2016 | 6x120 | 66.9 | 33 |
| 2017 | 6x120 | 66.9 | 33 |
| 2018 | 6x120 | 66.9 | 33 |
| 2019 | 6x120 | 66.9 | 33 |
| 2020 | 6x120 | 66.9 | 33 |
| 2021 | 6x120 | 66.9 | 33 |
| 2022 | 6x120 | 66.9 | 33 |
| 2023 | 6x139.7 | 78.1 | 30 |
| 2024 | 6x139.7 | 78.1 | 30 |
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 2007 GMC Canyon Crew Cab
For your 2007 GMC Canyon Crew Cab, the 6x139.7 bolt pattern is shared with 2004–2024 models, but the 100.3mm center bore is critical. Aftermarket wheels often have a larger bore; use hub-centric rings to prevent vibration and ensure proper load transfer. Offset is sensitive: the factory 33mm offset maintains suspension geometry and tire clearance. Deviating by more than 10mm may cause rubbing or handling issues. Always verify lug nut thread pitch (12x1.5) and seat type—factory uses cone seats; using ball-seat lug nuts can lead to wheel loosening. Re-torque after 50 miles of driving.
Historical Fitment Data Reference
In our dataset, GMC Canyon Crew Cab appears from 2004 to 2024 (19 model years). Across model years, this model appears with 2 bolt patterns (6x120, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 3
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 3.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 140 ft-lbs after 50 miles, then periodically check.
- ✅ Avoid using wheels from 6x120 pattern Canyons (some years) without adapters.
- ✅ If lowering, ensure offset stays within 25-40mm to prevent tire rub on fenders.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2007 GMC Canyon Crew Cab — Frequently Asked Questions
What is the bolt pattern for a 2007 GMC Canyon Crew Cab?
The 2007 GMC Canyon Crew Cab uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 100.3mm and the offset is 33mm.
What other years of GMC Canyon Crew Cab have the same bolt pattern as the 2007?
The GMC Canyon Crew Cab uses the 6x139.7 pattern from 2004 through 2024. Wheels from any of these model years are dimensionally compatible with the 2007, provided the offset and center bore also match.
Can I use spacers on my 2007 GMC Canyon Crew Cab?
Yes, but ensure the wheel spacers match the 6x139.7 bolt pattern and 100.3mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
How do I measure the bolt pattern on my 2007 GMC?
The 2007 Canyon Crew Cab uses a 6x139.7 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I put aftermarket wheels on my 2007 GMC Canyon Crew Cab?
Absolutely. Just ensure the aftermarket wheels have a 6x139.7 bolt pattern, an offset near 33mm, and a center bore of at least 100.3mm (using hub rings if larger).
What does 33mm offset mean for the 2007 Canyon Crew Cab?
An offset of 33mm means the wheel's mounting surface is 33mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your GMC.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset