2012 GMC Canyon Crew Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2012 GMC Canyon Crew Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 100.3 mm |
| Offset (ET) | 33 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2012 Canyon Crew Cab — Year-Specific Fitment Context
The 2012 GMC Canyon Crew Cab is in year 9 of 21 using the 6x139.7 pattern (2004–2024). Wheels from any 2004–2024 GMC Canyon Crew Cab are cross-compatible with the 2012 model. Across its full production run (2004–2024), the Canyon Crew Cab has also used: 6x120.
GMC Canyon Crew Cab Bolt Pattern by Year
The table below shows how the Canyon Crew Cab's wheel specifications have changed over the years. The 2012 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2004 | 6x139.7 | 100.3 | 33 |
| 2005 | 6x139.7 | 100.3 | 33 |
| 2006 | 6x139.7 | 100.3 | 33 |
| 2007 | 6x139.7 | 100.3 | 33 |
| 2008 | 6x139.7 | 100.3 | 33 |
| 2009 | 6x139.7 | 100.3 | 33 |
| 2010 | 6x139.7 | 100.3 | 33 |
| 2011 | 6x139.7 | 100.3 | 33 |
| ▸ 2012 | 6x139.7 | 100.3 | 33 |
| 2015 | 6x120 | 66.9 | 33 |
| 2016 | 6x120 | 66.9 | 33 |
| 2017 | 6x120 | 66.9 | 33 |
| 2018 | 6x120 | 66.9 | 33 |
| 2019 | 6x120 | 66.9 | 33 |
| 2020 | 6x120 | 66.9 | 33 |
| 2021 | 6x120 | 66.9 | 33 |
| 2022 | 6x120 | 66.9 | 33 |
| 2023 | 6x139.7 | 78.1 | 30 |
| 2024 | 6x139.7 | 78.1 | 30 |
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 2012 GMC Canyon Crew Cab
For your 2012 GMC Canyon Crew Cab, the bolt pattern is 6x139.7mm with a center bore of 100.3mm. When selecting aftermarket wheels, ensure the center bore matches exactly or use hub-centric rings to prevent vibration and ensure proper load distribution. The factory offset is 33mm; staying within ±5mm is recommended to avoid rubbing or suspension interference. Always use the correct lug nuts: 12x1.5 thread pitch with a conical (60-degree) seat. Never use ball-seat lug nuts, as they can loosen. Re-torque lug nuts after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, GMC Canyon Crew Cab appears from 2004 to 2024 (19 model years). Across model years, this model appears with 2 bolt patterns (6x120, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 3
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 3.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 140 ft-lbs after 50-100 miles of driving.
- ✅ If using aftermarket wheels with a larger center bore, install hub-centric rings to match the 100.3mm hub.
- ✅ Avoid wheels with offset below 28mm or above 38mm to prevent rubbing on the suspension or fenders.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2012 GMC Canyon Crew Cab — Frequently Asked Questions
What is the bolt pattern for a 2012 GMC Canyon Crew Cab?
The 2012 GMC Canyon Crew Cab uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 100.3mm and the offset is 33mm.
What other years of GMC Canyon Crew Cab have the same bolt pattern as the 2012?
The GMC Canyon Crew Cab uses the 6x139.7 pattern from 2004 through 2024. Wheels from any of these model years are dimensionally compatible with the 2012, provided the offset and center bore also match.
Do 2012 GMC Canyon Crew Cabs use lug bolts or lug nuts?
The 2012 Canyon Crew Cab requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Will wheels from another GMC fit my 2012 Canyon Crew Cab?
Only if they share the exact same 6x139.7 bolt pattern, a compatible offset, and a center bore equal to or larger than 100.3mm.
What is the factory wheel offset for a 2012 GMC Canyon Crew Cab?
The OEM offset for the 2012 Canyon Crew Cab is typically around 33mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the PCD for a 2012 GMC Canyon Crew Cab?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2012 Canyon Crew Cab, the PCD is 6x139.7.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset