2006 GMC Canyon Crew Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2006 GMC Canyon Crew Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 100.3 mm |
| Offset (ET) | 33 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2006 Canyon Crew Cab — Year-Specific Fitment Context
The 2006 GMC Canyon Crew Cab is in year 3 of 21 using the 6x139.7 pattern (2004–2024). Wheels from any 2004–2024 GMC Canyon Crew Cab are cross-compatible with the 2006 model. Across its full production run (2004–2024), the Canyon Crew Cab has also used: 6x120.
GMC Canyon Crew Cab Bolt Pattern by Year
The table below shows how the Canyon Crew Cab's wheel specifications have changed over the years. The 2006 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2004 | 6x139.7 | 100.3 | 33 |
| 2005 | 6x139.7 | 100.3 | 33 |
| ▸ 2006 | 6x139.7 | 100.3 | 33 |
| 2007 | 6x139.7 | 100.3 | 33 |
| 2008 | 6x139.7 | 100.3 | 33 |
| 2009 | 6x139.7 | 100.3 | 33 |
| 2010 | 6x139.7 | 100.3 | 33 |
| 2011 | 6x139.7 | 100.3 | 33 |
| 2012 | 6x139.7 | 100.3 | 33 |
| 2015 | 6x120 | 66.9 | 33 |
| 2016 | 6x120 | 66.9 | 33 |
| 2017 | 6x120 | 66.9 | 33 |
| 2018 | 6x120 | 66.9 | 33 |
| 2019 | 6x120 | 66.9 | 33 |
| 2020 | 6x120 | 66.9 | 33 |
| 2021 | 6x120 | 66.9 | 33 |
| 2022 | 6x120 | 66.9 | 33 |
| 2023 | 6x139.7 | 78.1 | 30 |
| 2024 | 6x139.7 | 78.1 | 30 |
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 2006 GMC Canyon Crew Cab
For your 2006 GMC Canyon Crew Cab, the 6x139.7 bolt pattern is shared across 2004–2024 models, but the 100.3mm center bore is critical. Aftermarket wheels often have a larger bore (e.g., 108mm), requiring hub-centric rings to prevent vibration and ensure load is on the hub, not the lugs. Offset sensitivity is high; the factory 33mm offset maintains proper scrub radius and suspension geometry. Deviating more than ±10mm may cause rubbing or handling issues. Always use 12x1.5 lug nuts with the correct seat type—factory wheels use cone seat, but aftermarket may require ball or shank nuts. Improper seating can lead to wheel loss. Re-torque after 50 miles of driving.
Historical Fitment Data Reference
In our dataset, GMC Canyon Crew Cab appears from 2004 to 2024 (19 model years). Across model years, this model appears with 2 bolt patterns (6x120, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 3
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 3.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 140 ft-lb after 50 miles of driving to account for settling.
- ✅ If using aftermarket wheels, verify hub-centric ring inner diameter matches 100.3mm and outer diameter matches wheel bore.
- ✅ Avoid wheels with offset below 23mm or above 43mm to prevent rubbing on suspension or fenders.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2006 GMC Canyon Crew Cab — Frequently Asked Questions
What is the bolt pattern for a 2006 GMC Canyon Crew Cab?
The 2006 GMC Canyon Crew Cab uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 100.3mm and the offset is 33mm.
What other years of GMC Canyon Crew Cab have the same bolt pattern as the 2006?
The GMC Canyon Crew Cab uses the 6x139.7 pattern from 2004 through 2024. Wheels from any of these model years are dimensionally compatible with the 2006, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2006 GMC?
The 2006 Canyon Crew Cab uses a 6x139.7 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What lug nut size does the 2006 GMC Canyon Crew Cab use?
The 2006 GMC Canyon Crew Cab uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Can I put aftermarket wheels on my 2006 GMC Canyon Crew Cab?
Absolutely. Just ensure the aftermarket wheels have a 6x139.7 bolt pattern, an offset near 33mm, and a center bore of at least 100.3mm (using hub rings if larger).
Do 2006 GMC Canyon Crew Cabs use lug bolts or lug nuts?
The 2006 Canyon Crew Cab requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset