2026 Isuzu FTR Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Isuzu FTR is 10x225. It has a center bore of 161 mm, an offset range of Not Applicable, and utilizes 22x1.5 (Flat seat, 33mm hex) fasteners tightened to 450-500 ft-lbs (610-678 Nm).
2026 Isuzu FTR Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 10x225 |
|---|---|
| Center Bore (Hub Bore) | 161 mm |
| Offset Range (ET) | Not Applicable |
| Thread Size (Lug Nut / Bolt) | 22x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 33mm |
| Wheel Torque Specs | 450-500 ft-lbs (610-678 Nm) |
2026 FTR — Year-Specific Fitment Context
The 2026 model year is the final year of the Isuzu FTR's 10x225 bolt pattern run (since 2024). Wheels from any 2024–2026 Isuzu FTR are cross-compatible with the 2026 model.
Isuzu FTR Bolt Pattern by Year
Looking for all generations? View the complete Isuzu FTR (2024–2026) Bolt Pattern & Generation Guide →
The table below shows how the FTR's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 Isuzu FTR Wheel Interchange & Donor Fitment Guide (10x225)
The 10x225 bolt pattern is shared by 18 vehicles in our database (uncommon). For safe wheel swaps on the 2026 Isuzu FTR, donor rims must match the 10x225 PCD and have a center bore of at least 161 mm:
DIRECT HUB MATCH Same 10x225 Pattern & Exact 161mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2024 Freightliner MT 45G Front Gasoline Engine Walk in Van Chassis | 161 mm (Exact) | Not Applicable | M22x1.5 (Flat) |
HUB RING FITMENT Same 10x225 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2025 Chevrolet 5500HG | 170.2 mm | 170.2mm → 161mm |
Not Applicable |
| 2025 Ford F-650 | 170 mm | 170mm → 161mm |
Not Applicable |
| 2025 Ford F-750 | 170 mm | 170mm → 161mm |
Not Applicable |
| 2024 Ford F450 Super Duty Regular Cab | 170.1 mm | 170.1mm → 161mm |
0 |
| 2024 Chevrolet 5500HD | 170.2 mm | 170.2mm → 161mm |
Not Applicable |
Quick Tips & Safety Warnings
- ⚠️ Torque lugs in a star pattern to 450-500 ft-lbs (610-678 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Isuzu FTR — Frequently Asked Questions
What is the bolt pattern for a 2026 Isuzu FTR?
The 2026 Isuzu FTR uses a 10x225 bolt pattern (also called lug pattern or PCD). The center bore is 161mm and the offset is Not Applicablemm.
What other years of Isuzu FTR have the same bolt pattern as the 2026?
The Isuzu FTR uses the 10x225 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2026 Isuzu FTR?
Absolutely. Just ensure the aftermarket wheels have a 10x225 bolt pattern, an offset near Not Applicablemm, and a center bore of at least 161mm (using hub rings if larger).
What is the PCD for a 2026 Isuzu FTR?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2026 FTR, the PCD is 10x225.
How tight should I torque the lug nuts on a 2026 Isuzu FTR?
Refer to your owner's manual for exact specs, but always tighten the 22x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What does Not Applicablemm offset mean for the 2026 FTR?
An offset of Not Applicablemm means the wheel's mounting surface is Not Applicablemm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Isuzu.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →