2026 Isuzu NPR-XD Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Isuzu NPR-XD is 6x170. It has a center bore of 131 mm, an offset range of 110-120, and utilizes 14x1.5 (Flat seat, 22mm hex) fasteners tightened to 325 ft-lbs (441 Nm).
2026 Isuzu NPR-XD Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 6x170 |
|---|---|
| Center Bore (Hub Bore) | 131 mm |
| Offset Range (ET) | 110-120 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 22mm |
| Wheel Torque Specs | 325 ft-lbs (441 Nm) |
2026 NPR-XD — Year-Specific Fitment Context
The 2026 model year is the final year of the Isuzu NPR-XD's 6x170 bolt pattern run (since 2024). Wheels from any 2024–2026 Isuzu NPR-XD are cross-compatible with the 2026 model.
Isuzu NPR-XD Bolt Pattern by Year
Looking for all generations? View the complete Isuzu NPR-XD (2024–2026) Bolt Pattern & Generation Guide →
The table below shows how the NPR-XD's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 Isuzu NPR-XD Wheel Interchange & Donor Fitment Guide (6x170)
The 6x170 bolt pattern is shared by 6 vehicles in our database (uncommon). For safe wheel swaps on the 2026 Isuzu NPR-XD, donor rims must match the 6x170 PCD and have a center bore of at least 131 mm:
DIRECT HUB MATCH Same 6x170 Pattern & Exact 131mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2026 Isuzu NQR | 131 mm (Exact) | Not Applicable | 14x1.5 (Flat) |
Quick Tips & Safety Warnings
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 325 ft-lbs (441 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Isuzu NPR-XD — Frequently Asked Questions
What is the bolt pattern for a 2026 Isuzu NPR-XD?
The 2026 Isuzu NPR-XD uses a 6x170 bolt pattern (also called lug pattern or PCD). The center bore is 131mm and the offset is 110-120mm.
What other years of Isuzu NPR-XD have the same bolt pattern as the 2026?
The Isuzu NPR-XD uses the 6x170 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
Can I use spacers on my 2026 Isuzu NPR-XD?
Yes, but ensure the wheel spacers match the 6x170 bolt pattern and 131mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
What is the center bore of a 2026 Isuzu NPR-XD?
The factory center bore (hub bore) for the 2026 Isuzu NPR-XD is 131mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the factory wheel offset for a 2026 Isuzu NPR-XD?
The OEM offset for the 2026 NPR-XD is typically around 110-120mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How tight should I torque the lug nuts on a 2026 Isuzu NPR-XD?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →