2026 Isuzu NQR Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Isuzu NQR is 6x170. It has a center bore of 131 mm, an offset range of Not Applicable, and utilizes 14x1.5 (Flat seat, 22mm hex) fasteners tightened to 430 ft-lbs (583 Nm).
2026 Isuzu NQR Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 6x170 |
|---|---|
| Center Bore (Hub Bore) | 131 mm |
| Offset Range (ET) | Not Applicable |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 22mm |
| Wheel Torque Specs | 430 ft-lbs (583 Nm) |
2026 NQR — Year-Specific Fitment Context
The 2026 model year is the final year of the Isuzu NQR's 6x170 bolt pattern run (since 2024). Wheels from any 2024–2026 Isuzu NQR are cross-compatible with the 2026 model.
Isuzu NQR Bolt Pattern by Year
Looking for all generations? View the complete Isuzu NQR (2024–2026) Bolt Pattern & Generation Guide →
The table below shows how the NQR's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 Isuzu NQR Wheel Interchange & Donor Fitment Guide (6x170)
The 6x170 bolt pattern is shared by 6 vehicles in our database (uncommon). For safe wheel swaps on the 2026 Isuzu NQR, donor rims must match the 6x170 PCD and have a center bore of at least 131 mm:
DIRECT HUB MATCH Same 6x170 Pattern & Exact 131mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2026 Isuzu NPR-XD | 131 mm (Exact) | 110-120 | 14x1.5 (Flat) |
Quick Tips & Safety Warnings
- ⚠️ Torque lugs in a star pattern to 430 ft-lbs (583 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Isuzu NQR — Frequently Asked Questions
What is the bolt pattern for a 2026 Isuzu NQR?
The 2026 Isuzu NQR uses a 6x170 bolt pattern (also called lug pattern or PCD). The center bore is 131mm and the offset is Not Applicablemm.
What other years of Isuzu NQR have the same bolt pattern as the 2026?
The Isuzu NQR uses the 6x170 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
What is the center bore of a 2026 Isuzu NQR?
The factory center bore (hub bore) for the 2026 Isuzu NQR is 131mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Can I use spacers on my 2026 Isuzu NQR?
Yes, but ensure the wheel spacers match the 6x170 bolt pattern and 131mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
Can I put aftermarket wheels on my 2026 Isuzu NQR?
Absolutely. Just ensure the aftermarket wheels have a 6x170 bolt pattern, an offset near Not Applicablemm, and a center bore of at least 131mm (using hub rings if larger).
What is the factory wheel offset for a 2026 Isuzu NQR?
The OEM offset for the 2026 NQR is typically around Not Applicablemm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →