2025 Isuzu NQR Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2025 Isuzu NQR is 6x170. It has a center bore of 131 mm, an offset range of Not Applicable, and utilizes 14x1.5 (Flat seat, 22mm hex) fasteners tightened to 430 ft-lbs (583 Nm).
2025 Isuzu NQR Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 6x170 |
|---|---|
| Center Bore (Hub Bore) | 131 mm |
| Offset Range (ET) | Not Applicable |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 22mm |
| Wheel Torque Specs | 430 ft-lbs (583 Nm) |
2025 NQR — Year-Specific Fitment Context
The 2025 Isuzu NQR is in year 2 of 3 using the 6x170 pattern (2024–2026). Wheels from any 2024–2026 Isuzu NQR are cross-compatible with the 2025 model.
Isuzu NQR Bolt Pattern by Year
Looking for all generations? View the complete Isuzu NQR (2024–2026) Bolt Pattern & Generation Guide →
The table below shows how the NQR's wheel specifications have changed over the years. The 2025 model year is highlighted.
2025 Isuzu NQR Wheel Interchange & Donor Fitment Guide (6x170)
The 6x170 bolt pattern is shared by 6 vehicles in our database (uncommon). For safe wheel swaps on the 2025 Isuzu NQR, donor rims must match the 6x170 PCD and have a center bore of at least 131 mm:
DIRECT HUB MATCH Same 6x170 Pattern & Exact 131mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2026 Isuzu NPR-XD | 131 mm (Exact) | 110-120 | 14x1.5 (Flat) |
Quick Tips & Safety Warnings
- ⚠️ Torque lugs in a star pattern to 430 ft-lbs (583 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2025 Isuzu NQR — Frequently Asked Questions
What is the bolt pattern for a 2025 Isuzu NQR?
The 2025 Isuzu NQR uses a 6x170 bolt pattern (also called lug pattern or PCD). The center bore is 131mm and the offset is Not Applicablemm.
What other years of Isuzu NQR have the same bolt pattern as the 2025?
The Isuzu NQR uses the 6x170 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2025 Isuzu NQR?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Why is matching the 131mm center bore important for the 2025 NQR?
The 131mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the PCD for a 2025 Isuzu NQR?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2025 NQR, the PCD is 6x170.
What is the factory wheel offset for a 2025 Isuzu NQR?
The OEM offset for the 2025 NQR is typically around Not Applicablemm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →