1999 Isuzu VehiCROSS Bolt Pattern

Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1999 Isuzu VehiCROSS, along with offset and center bore data.

Bolt Pattern (Lug Pattern) 6x139.7 (6x5.5")
Lug Nut / Bolt Size 12x1.5
Center Bore (CB) 100.1 mm
Offset (ET) 38
Torque Specs 80 ft-lbs (108 Nm)

1999 VehiCROSS — Year-Specific Fitment Context

The 1999 model year marks the beginning of the Isuzu VehiCROSS's 6x139.7 bolt pattern era, which continued through 2001 (3 consecutive years). Wheels from any 1999–2001 Isuzu VehiCROSS are cross-compatible with the 1999 model.

Isuzu VehiCROSS Bolt Pattern by Year

The table below shows how the VehiCROSS's wheel specifications have changed over the years. The 1999 model year is highlighted.

Year Bolt Pattern Center Bore Offset
▸ 1999 6x139.7 100.1 38
2000 6x139.7 100.1 38
2001 6x139.7 100.1 38

Fitment Notes

The 1999 Isuzu VehiCROSS has a bolt pattern of 6x139.7.

Imperial Conversion: This bolt pattern is commonly referred to as 6x5.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 6x5.5".

This means it is a 6 lug pattern with a circle diameter of 139.7mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.

Year-to-Year Fitment Context

In our dataset, Isuzu VehiCROSS appears from 1999 to 2001 (3 model years).

Across recorded model years, this model generally keeps the same bolt pattern.

6x139.7 Pattern Context

This bolt pattern appears on 1067 vehicles in our current database and is considered common.

Examples of other vehicles using 6x139.7:

1999 Isuzu VehiCROSS — Frequently Asked Questions

What is the bolt pattern for a 1999 Isuzu VehiCROSS?

The 1999 Isuzu VehiCROSS uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 100.1mm and the offset is 38mm.

What other years of Isuzu VehiCROSS have the same bolt pattern as the 1999?

The Isuzu VehiCROSS uses the 6x139.7 pattern from 1999 through 2001. Wheels from any of these model years are dimensionally compatible with the 1999, provided the offset and center bore also match.

Can I put aftermarket wheels on my 1999 Isuzu VehiCROSS?

Absolutely. Just ensure the aftermarket wheels have a 6x139.7 bolt pattern, an offset near 38mm, and a center bore of at least 100.1mm (using hub rings if larger).

Do 1999 Isuzu VehiCROSSs use lug bolts or lug nuts?

The 1999 VehiCROSS requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.

What is the factory wheel offset for a 1999 Isuzu VehiCROSS?

The OEM offset for the 1999 VehiCROSS is typically around 38mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.

Can I use spacers on my 1999 Isuzu VehiCROSS?

Yes, but ensure the wheel spacers match the 6x139.7 bolt pattern and 100.1mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.

Fitment Checklist Before You Buy Wheels

Editorial Fitment Notes

Isuzu VehiCROSS is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.

Data Quality & Review

Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.

Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team

If you find a discrepancy for 1999 Isuzu VehiCROSS, please report it via our About page contact so we can verify and update this record.

Isuzu VehiCROSS By Year

1999 2000 2001

Other Isuzu Models

Amigo Ascender Axiom Hombre Regular Cab Hombre Spacecab Impulse Oasis Regular Cab Rodeo Rodeo Sport Spacecab Stylus Trooper VehiCROSS i-280 Extended Cab i-290 Extended Cab i-350 Crew Cab i-370 Crew Cab i-370 Extended Cab