2001 Isuzu VehiCROSS Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2001 Isuzu VehiCROSS, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 100.1 mm |
| Offset (ET) | 38 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2001 VehiCROSS — Year-Specific Fitment Context
The 2001 model year is the final year of the Isuzu VehiCROSS's 6x139.7 bolt pattern run (since 1999). Wheels from any 1999–2001 Isuzu VehiCROSS are cross-compatible with the 2001 model.
Isuzu VehiCROSS Bolt Pattern by Year
The table below shows how the VehiCROSS's wheel specifications have changed over the years. The 2001 model year is highlighted.
Fitment Notes
The 2001 Isuzu VehiCROSS has a bolt pattern of 6x139.7.
Imperial Conversion: This bolt pattern is commonly referred to as 6x5.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 6x5.5".
This means it is a 6 lug pattern with a circle diameter of 139.7mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Isuzu VehiCROSS appears from 1999 to 2001 (3 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
2001 Isuzu VehiCROSS — Frequently Asked Questions
What is the bolt pattern for a 2001 Isuzu VehiCROSS?
The 2001 Isuzu VehiCROSS uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 100.1mm and the offset is 38mm.
What other years of Isuzu VehiCROSS have the same bolt pattern as the 2001?
The Isuzu VehiCROSS uses the 6x139.7 pattern from 1999 through 2001. Wheels from any of these model years are dimensionally compatible with the 2001, provided the offset and center bore also match.
What is the PCD for a 2001 Isuzu VehiCROSS?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2001 VehiCROSS, the PCD is 6x139.7.
What lug nut size does the 2001 Isuzu VehiCROSS use?
The 2001 Isuzu VehiCROSS uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
How tight should I torque the lug nuts on a 2001 Isuzu VehiCROSS?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the factory wheel offset for a 2001 Isuzu VehiCROSS?
The OEM offset for the 2001 VehiCROSS is typically around 38mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Isuzu VehiCROSS is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 1999-2001 (3 model years).
- Observed bolt-pattern variants: 1 (6x139.7).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2001 Isuzu VehiCROSS, please report it via our About page contact so we can verify and update this record.